Jump to content

    (0 reviews)

    How to embroider on knitwear?

    How to embroider on knitwear?

    To create a high-quality and good-looking embroidery on knitwear we’ll need:

    • Knitwear fabric of any composition. I have cut a new knitwear jacket and will do the embroidery on it.
    • Embroidery stabilizer. I recommend a tearaway STIFFY stabilizer (by Gunold) or COTTON SOFT (by Madeira). If you going to use a non-sticky stabilizer, add a layer KK 100, a temporary adhesive (by Gunold). In order to embroider on knitted fabric, it’s better to use an adhesive stabilizer named FILMOPLAST (a stabilizer is hooped, and the fabric is glued to it).
    • AVALON FILM, a water-soluble stabilizer by Madeira.
    • Embroidery threads of the necessary color made of 100% rayon, in order for the embroidery to be soft (Madeira RAYON #40).
    • Bobbin thread for machine embroidery, same color as the fabric (AMMAN BELFIL-C #120).
    • Needles for knitwear (SCHMETZ Stretch), their number depending on the thickness of your fabric and threads.

    Knitwear stabilizers

    Cut out a pattern, choose where to place the embroidery, and mark the place.

    Knitwear t-shirt and iron

    If you use a sticky stabilizer, glue it to the wrong side of the detail with an iron. If you use a non-sticky stabilizer, spray it with a temporary spray adhesive and attach it to the knitwear detail. A piece of stabilizer should be 3-5 cm bigger then the hoop you're going to use, so as to secure the fabric and the stabilizer.

    In order to get a high-quality embroidery, cover the right side of the fabric with a piece of water-soluble material and secure it in the hoop.

    Start your machine and run the embroidery.

    Knitwear cut and hooped

    After it has finished stitching, carefully remove the excess stabilizer: both water-soluble and tearaway. Holding the embroidery with one hand, remove the Avalon. Turn it to the other side, and tear away the other stabilizer. Stabilizers come off easily as a rule because the needle cuts them along the edges.

    Blue machine embroidery on knitwear

    What’s left under the stitches will be washed out during the first laundry.

    See how easily you’ve made a one-of-kind T-shirt!

    Brown t-shirt with blue embroidery

    Original text by Irina Yemelyanova

    Edited by Irina


    • Like 2


    User Feedback

    Recommended Comments

    Das ist wieder so gut erklärt, dass auch jeder Neueinsteiger alles prima nachmachen kann.  Vielen lieben Dank 

    • Like 1

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...