Jump to content

New embroidery designs

City and country .. New embroidery designs for your living room . 
Buy Now

You Love them all

Stitched out beautifully! Looked amazing and no issues!
Buy Now

Paris, Girl and bicycle

You love this when you stitched it. Would love more of same designs
Buy Now
  • entries
    113
  • comments
    51
  • views
    82,885

Contributors to this blog

About this blog

News about machine embroidery software and digitizing.

Entries in this blog

Travis

The present focused market calls for imaginative ways to deal with advancement of custom embroidery services. From imaginative introductions to simple to-explore online web stores to stunning IT administration frameworks, we give our clients the ability to broaden their corporate marking activities and surpass their showcasing objectives. Also, our far reaching request preparing and satisfaction administrations enable them to stay concentrated on their center business while our turnkey operation deals with the difficulties of the advancements and satisfaction business.

Considering your alternatives for custom attire, embroidered clothing conveys a fundamental feeling of value that addresses the intuitive of customers and clients, giving a sentiment trust and fulfillment.

Advantages of custom embroidery:

  • It gives you a professional appearance.
  • It can be put on a wide assortment of materials.
  • It lasts longer (doesn't wear off like silkscreen paint does).
  • It can be washed easily.
  • Large amount of shades are accessible in it.

Some typical examples of custom embroidery embroider clothing are:

  • Hoodies – flexible for a scope of icy climate outside work.
  • Sweatshirts – like hoodies, a sweatshirt is extraordinary to keeping warm and agreeable.
  • Fleeces– Zipped fleeces are a decent hindrance against unforgiving conditions.
  • Shorts – In summer, shorts for men and ladies are accessible to keep cool.
  • Action Trousers – A more down to earth and hard wearing other option to brilliant pants.
  • Body warmers – Another extraordinary expansion to icy climate work.

Holloway 222530.jpg

Holloway 224062.jpg

Holloway 224181 Award Jacket.jpg

Holloway 226000 Faceoff Jersey.jpg

Holloway 228263 Youth Ball Park Jersey.jpg

embdesigntube

 

All in all, you're taking a gander at getting sewing machine surveys a fresh out of the box new sewing machine? It manages without asserting that obviously, you wish to guarantee that you get the best sewing machine for you - the one that is going to suit your prerequisites.

All things considered, preceding you go on and make your buy, it's a shrewd thought dependably, to do a tiny bit of study furthermore a touch of heart looking to really get clear in your psyche precisely what you require furthermore exactly the amount you expect to contribute.

By taking this tad bit of time and setting in a touch of thought before giving over your hard made bucks, you could help to ensure that you ration yourself from the aggravation of having a machine that does not do what you oblige it to do and the conceivable monetary strain, that can be made later on by over contributing on your fresh out of the plastic new machine.  So permit's begin with the two key worries to ask all alone:

To start with - How much would you like to contribute?

This is a really crucial worry to ask all alone preceding gaining your sewing machine, else you may find yourself escaping in a fantasy universe of sewing open doors and also spending route more prominent than you can figure out how to on your fresh out of the plastic new machine, abandoning you fiscally reached out and also lamenting your buy later on - when the happiness regarding your new toy has slowed down.  Sewing machine rates can vary from as meager as $30 to $1000's contingent on the limits of the machine.

So pick what is the ideal amount of cash you consent to contribute and afterward find a machine that will unquestionably do precisely what you fancy it to - inside your rate range.

Second - What are you going to utilize your living arrangement sewing hardware for?

Why do you crave a sewing machine? Is it only to heal furthermore repair administrations? It is safe to say that you are thinking about doing somewhat standard sewing? On the other hand, would you say you will do a lot of sewing? Making pieces of clothing, doing knitting or specialties?

On the off chance that you just wish to do some standard sewing or repairing then you'll no doubt require a hardware that does the major lines, for example, straight fasten, crisscross and conceivably a couple substantially more which accompanies an essential presser foot, potentially a zipper foot and additionally a catch opening foot.

An essential machine, for example, this will surely empower you to do repairing, repair function and also some fundamental sewing if that is exactly what you crave.

In any case in case you're considering doing substantially more perplexing sewing employments or utilizing your sewing machine a ton, then it will be justified regardless of your while to get an a great deal more unpredictable machine that has more options coordinated in, for example, an expensive determination of implicit lines, programmed switch holing and included reward offer machines, for example, distinctive particular presser feet that could make testing exercises simple.

There is some exceptionally modernized sewing hardware offered today that simply make life significantly less confounded and make sewing exercises so much faster. Decisions, for example, one activity catch openings, where whatever you do is associate the right presser foot, press the perfect catches furthermore away it goes - the machine does everything for you. Speedily furthermore rapidly.

Different choices, for example, computerized threading that may not seem like a colossal arrangement, however when you're modifying cotton routinely, could be a lifesaver! These sorts of capacities can ration a group of time furthermore make you a lot more productive. In case you're planning on doing a lot of sewing, these sorts of components will empower you to accomplish more in a shorter time which is something to be thought about.

In this way, have a consider exactly what you mean to accomplish with your new machine, the amount you need to contribute and subsequently concentrate on different models to locate the absolute best sewing machine for you!

Embroidery Bucket

Embroidery Digitizing is a method to decorate the overall look of the design or material. The methodology starts when the art-piece is turned into a digital format and then the compatible software works on it to enhance the visibility and corporate image. After that, the design is read by the embroidery machine, turned into the graphic format and in the end; the machine embroiders the artwork efficiently. The techniques and methods take whole lot of efforts and expertise to get the job properly done.

Now comes the question that in which category, does Embroidery Digitizing go to? Well, the simple answer is that it is a mix of both as only one characteristic between these two cannot be used to describe it. As technical as it looks, embroidery digitizing is basically an art as well.

Embroidery Digitizing as Art:

This embroidery method is all about understanding and learning about how the artwork is going to be designed and what should be the color combination. The look of “natural flair” is always taken as the priority because just like every art, beauty only shows when the product gives away natural flair. Along with that, the artistic touch and sense are also required when several things are decided, such as the patterns, vectorization and the decision of filling the blank spaces. The appropriate coordination of colors and shades is also important as well.

Digitizing for embroidery is a kind of art procedure that definitely demands loads of things in terms of expertise of engineering, energy, motivation, material and performing the art in right direction. If it would be all about technical know-how, then it is not important at all to make so much effort to providing the best color schemes and making the designs look natural, which is the basic portion of embroidery digitizing.

Embroidery Digitizing As Technical Skill:

Along with being an art, it is a technical skill mainly because of the usage of the digitizing software, which is the most important part of the method. While making the use of the software, the optimum utilization of other tools is also of real importance so to ensure other factors, such as to make a correct number of stitches and not make them too dense etc. All of such considerations definitely need technological skills and understanding. There are times when the exact size and shape is needed, but not provided so the critical skill set is also required there to make sure that the design is made into the right size.

So now you understand that embroidery digitizing is basically a combination of both art and technology that blend together to provide the high-quality embroidery experience to you & your clients. As stated above, it is both the art and the skill, so if you want any of your art piece embroidered and digitized, make sure that is gets done professionally by the service providers who are already the experts of this business. This work only looks good when it is done in excellence, which can only be achieved if the practitioners stay in business for quite a while.

Promotional-Content-for-Embroidery-Digitizing.png

diver361

This step by step instruction for free machine embroidery design 

 

Hardanger is based exactly on the same principle as cutwork. Hoop the fabric together with the water-soluble stabilizer. 
With the first color, you embroider the outline to mark the area where the holes will be cut. After that, without making a stop (to avoid extra knots), add a zigzag stitch on top of the outline. Having done that, take the hoop off the machine and cut holes in the outlined area, trying not to damage the stabilizer (Image 1). 

hardanger_free_design_step_1.jpg
Second color – a laced net is added in place of the cutouts (Image 2). 

hardanger_free_design_step_2.jpg
Third color – it's recommended to use the thread of a matching color here in order to create a drawn fabric effect (Image 3). 

hardanger_free_design_step_3.jpg
With the fourth and the fifth colors, the design itself is embroidered, ending in a zigzag border. After that, you need to take the hoop off the machine and trim the fabric along the edges of the embroidery without touching the stabilizer (Image 4). 

hardanger_free_design_step_4.jpg
Sixth color – a decorative stitch is stitched along the bottom part of the design (Image 5). 

hardanger_free_design_step_5.jpg
Seventh color – lastly, the lips, nose and cap are embroidered (Image 6). 

hardanger_free_design_step_6.jpg

diver361

Question:  For some reason this will not completely install and I've tried several times. I'm using windows 10 with 4 core processor and 8 GB of ram and over 400 GB of free space. I have No issues downloading other programs so it must be some sort of problem with the program I believe. I hope someone else can confirm this.

my_editor_installation_problem.jpg

Support answer:  Please try the following: 1. Clean up all temp folders. In an explorer’s address bar type %temp% press enter.

clean_temp_folder.jpg

Delete all files that are allowed to be deleted.

2. Go to C:\windows\temp Delete all files.

3. Disable you antivirus software and try to make a new installation.

pjlmonteiro

Hi all,

I try embroid a minie file buyed on embroideres.com shop in my new embroidery Brother Innovis-NV800E with hoop 260x160 and the border of pictures  and the colours doesn't match. 

When I buy the minie file, it was possible download a "winnie the pooh" free file and when also I try embroid pooh file happens the same of minie file

To Embroid I used the pes file, but i also try pec and phc files and happen the sames always.

Exist any problem with the files? or exist any configuration i have wrong on my machine?, 

Anyone know what could be the problem?

thanks for the help,

Paulo Monteiro

Irina

Master-class by: Irina Lisitsa

Dense adhesive water soluble stabilizer is your first helper when it comes to embroidering lace and working with delicate fabrics: chiffon, organza, thin knitwear etc. A new machine embroidery stabilizer Solufix is different from the water soluble stabilizer we know, because of an additional layer of adhesive. It helps working with materials that cannot be hooped and also can be easily removed afterwords. An adhesive layer of Solufix secures the fabric while the embroidery process, and the water soluble part goes off by rinse with a warm water once the embroidery is completed. In this master-class I'll show you how to hoop a water soluble stabilizer Solufix.

Materials: 

  • Adhesive water soluble stabilizer 
  • Marker 
  • Scissors 
  • Hoop 
  • Fabric 

Place the hoop onto the stabilizer and mark the outer edges with a little allowance. 

adhesive.png.2c620098278a554a5df06094147

Link the marks with the lines. 

adhesive2.png.2c08ddbd56e1647a51db778f92

Cut the stabilizer along the lines you just draw. 

adhesive3.png.f243eb12f5fd3b3e8d954d6109

Put the stabilizer onto the outer ring of the hoop with the paper layer on top. 

adhesive4.png.85b32d3971797d4b86acc283ef

Press the stabilizer into the hoop slightly. 

adhesive5.png.abcc68b608e81bf98af52afa53

Put the inner ring on the top of it and press it inside to secure the stabilizer. 

adhesive6.png.fb1849a979b1bbdd6fb675da5a

Using your template, mark the edges of your embroidery area. 

adhesive7.png.0e21062626136559b497163cd5

Take the template off. 

adhesive8.png.f5ec0a1c2132f91cd26062b25b

Link all the marks together. 

adhesive9.png.bb1d2ecb9e038c587a83dba555

With the sharp edge of the scissors cut only the paper layer of your stabilizer. 

adhesive10.png.af1b1e114154ce24a09a8354d

Remove the paper layer. 

adhesive11.png.b5ae50d0765ef986c4a0e0193

Stick your stabilizer onto the fabric. 

adhesive12.png.e4ad59fe43d1112c39570cefb

There can be one or two layers of different size. 

adhesive13.png.7e7e09b80e28d9a7beb3f4923

Now the fabric is secured with the stabilizer, and you may proceed with your embroidery. 

adhesive14.png.cffc377c5e18522d49de9429b

Irina

Master-class by: Irina Lisitsa

Beginner owners of embroidery machines are at a loss when overlooking the vast majority of stabilizers. This series of master-classes will teach you the basic rules of hooping of various types of stabilizers. After having read this you will be able to hoop an adhesive stabilizer (Filmoplast) in the right way. This type of stabilizer allows you to secure fabric with a layer of adhesive. Works good for fabrics of high and medium density, and also fabrics that cannot be hooped, like leather, chamois and coated materials. 

How to hoop Filmoplast

We will need: 

  • Hoop 
  • Filmoplast stabilizer 
  • Marker 
  • Scissors 
  • Ruler 

Put the stabilizer with its paper layer facing up. Mark the borders of the hoop. 

filmoplast1.png.c680bc56543fc5c59a86934c

Cut a piece of stabilizer, using the marking on the paper layer. 

filmoplast2.png.55bf53f5973bed5fc893c6d9

Put it on the outer ring with the paper layer facing up. 

filmoplast3.png.ca6315de0dc98f45345456cc

Put the inner ring onto the stabilizer and press it down. 

filmoplast4.png.fcb0dea598440b227cdd7b97

Pull the edges of the stabilizer to smooth it out. Screw your hoop tightly. 

filmoplast5.png.1cf144755630887f60871342

Put the plastic template on the hoop and mark the borders of embroidery area with a marker. 

filmoplast6.png.7369168ba1139465f756d37a

Outline the borders of embroidery area with a marker or use the markings on the stabilizer. 

filmoplast7.png.abe8db29a1306a1025e68711

With the sharp end of scissors cut the paper layer along the lines. 

filmoplast8.png.3454b82bfe0f6145e59e38a2

Take off the paper layer of stabilizer, to free the sticky side. 

filmoplast9.png.40eb8e59d58cd618a4711b16

Stick your fabric onto it. 

filmoplast10.png.f9f30af9f70f53d7f5cd149

Embroider your design. 

filmoplast11.png.218e294ac2b0ea529524d85

When the embroidery is completed, take the design off the stabilizer. 

filmoplast12.png.f3031aa40a196144296de5a

Irina

Master-class by: Irina Lisitsa

Cutaway non-adhesive stabilizer works very good for embroidery on knitwear. Using this type of stabilizer allows keeping the shape of the embroidered area while the item is in use.

Cutaway non-adhesive stabilizer is used with temporary spray adhesive. This master-class will tell you how to hoop a cutaway non-adhesive stabilizer in the right way. 

How the right and wrong side of the item secured with the non-adhesive stabilizer look like. The embroidery was made on the fabric with thin stockinette structure. 

Materials:

  • Cutaway non-adhesive stabilizer 
  • Hoop 
  • Temporary spray adhesive 
  • An item 

Unscrew your hoop and take the inner part out. 

nonadhesive.png.5de6729e6071f98bf3bc61a1

Put a cutaway non-adhesive stabilizer onto the outer ring. 

nonadhesive2.png.7c20760c8c750350cea5f85

Put the inner ring onto it and press it down to secure the stabilizer. 

nonadhesive3.png.2d3cb103a1b6a4e46c62ccb

Pull the edge of a stabilizer so that it is tight in the hoop. 

nonadhesive4.png.4ddfb2c1b60e84f264207f4

Shake up a tube of spray. Put a layer of spray adhesive onto the stabilizer. 

nonadhesive5.png.c5fb2c6048cdf5c2f960a5f

Stick your fabric onto the stabilizer. 

nonadhesive6.png.498a6b8738e98da12f73c6a

Set you hoops in your machine and embroider the design. 

nonadhesive7.png.3cc4c477367fc65619748b1

After the embroidery is completed, cut stabilizer away near the contour. 

nonadhesive8.png.81fa89412bd0ca8174947cf

The embroidery is ready! 

nonadhesive10.png.e24703053a2c01907bffb2

Irina

Original text by: Katya Ebber

Your hoop is not one-size-fits-all. You become acutely aware of it when you need to embroider lace ribbons or edgings. This master-class will tell you how to align machine embroidery designs with lace so that the joining places could not be seen. This master-class shows working in the embroidery design software (creation of the alignment crosses), and also the embroidery process. 

Preparing the design in Embird 

Load a chosen machine embroidery design into Embird. Add the alignment stitches and half stitches at the top and the bottom of the design. Copy and flip them vertically. Having added the alignments stitches, change the order of steps in the embroidery, dragging the objects in the objects bar, and also change their color. The main objects should be located between the top and the bottom alignment stitches.

Click 'Paste' in the toolbar. In the pop-up list choose 'Basting' and define the stitch length. After you click 'OK' the guide stitch will be added to specify the design's position in the hoop.

How to align machine embroidery designs properly 

Load the prepared design into your embroidery machine and embroider the first color, according to the chart you added in the software.

Hoop the water soluble stabilizer and embroider the first design (001). 

Alignment stitches are embroidered with the last color of the design. They will be used as marks for linking this part of the design with the next. 

aligning-lace-01.jpg.edfc356a68f37663536

aligning-lace-02.jpg.9ae54dc577c40276ae3

aligning-lace-03.jpg.b7580814e719ad6ab1c

Having embroidered the first design, trim away the water soluble stabilizer near the embroidery. 

aligning-lace-04.jpg.7e69a33e10d13d8d75f

aligning-lace-05.jpg.d8f008ed1b0eaa6c876

Hoop water soluble stabilizer again and embroider first two colors of the design (the guide stitch and the alignment crosses). Remove the hoop from the machine and add a thin layer of spray adhesive. Using a short pin, join the center marks of the alignment crosses on the embroidery parts and on the water soluble stabilizer. 

aligning-lace-06.jpg.84de6e861c75b15a9b6

aligning-lace-07.jpg.2a63cdbcaaa09f97bdb

Do the alignment stitches without the thread to check if the hooping went right. If all the crosses and stitches match, begin the embroidery. If the alignment crosses do not match, repeat the alignment process as mentioned above.

aligning-lace-08.jpg.a585e3578e85a08d714

aligning-lace-09.jpg.830760c1d1cc60237bf

aligning-lace-10.jpg.391fc2ae4471ab40bdd

This method is good for many items where you need to embroider a repetitive pattern. We have embroidered lace today, but if you need to do the edging of the table cloth or curtain, this method will work just as good. Use tearaway non-adhesive stabilizer for fabrics.  

aligning-lace-11.jpg.43e031ed2ceb68b9cb9

aligning-lace-12.jpg.683910091b25437ad10

Irina

Original text by: Irina Lisitsa

Sometimes when I talk to the beginners or those in the process of choosing their first embroidery or sewing and embroidery machine, they ask me if there is a possibility of embroidering on terry cloth. The answer is: yes, but! You must follow the rules. The stitches of the already embroidered design may sink down and be lost in the pile and the thread or the needle may be tangled when embroidering on high speed. The needle breakage may follow, sometimes it may even spoil the embroidery. There are many useful videos on the internet, and I offer you one of them. It is a step-by-step guide, which will help you to understand hooping and embroidery processes even if you are not familiar with the terms. The master-class was done on a sewing-embroidery machine Brother Innov-is V7.

embroidery-on-terrycloth-01.jpg.b825055f

Materials 

•    180*300 mm hoop 
•    Upper thread 
•    Underthread 
•    Sewing and embroidery marker 
•    Temporary spray adhesive 
•    A terry towel size of 250x500 mm and bigger 
•    Water soluble stabilizer 
•    Non-adhesive cutaway stabilizer 

Embroidery on terry cloth: Tips 

When choosing a design for terry cloth, densely filled ones are preferable. The designs created with straight stitches may be lost in the high pile of the fabric right after the first wash. 

Water soluble stabilizer is used so that the stitches lie flat. It is used as the top stabilizer. 

Water soluble stabilizer comes as the film of varying density. I used dense water soluble film in my master-class, but don't hesitate to use a thin one. After the embroidery is completed, it can be removed more quickly and easily. 

Use a cutaway or a tearaway non-adhesive stabilizer as the underlay. Tearaway stabilizer is better, because it can be removed more quickly after the completion of the embroidery. 

Use printed templates to specify where your design will be placed. You can print your template with the help of PE Design.

embroidery-on-terrycloth-02.jpg.13e04f85 

Embroidery on terry cloth: First option

1.    Using the printed template, mark the center of the embroidery on the towel.
2.    Add a layer of spray adhesive on the tearaway non-adhesive stabilizer.
3.    Stick your terry towel onto stabilizer.
4.    Put a layer of the water soluble stabilizer on top of it. 
5.    Hoop this 'sandwich', aligning them so that the center mark on the stabilizer is right on top of the center mark on the towel. 
6.    Screw it tightly. 
7.    Set you hoop into your machine. 
8.    Load a machine embroidery design from USB-flash or choose the design from the memory of the sewing-embroidery machine. 
9.    Embroider your design. 
10.    After embroidery is completed, remove the 'sandwich' from the hoop. 
11.    Cut or tear away you underlay. 
12.    Holding the material in place with your hand, tear the stabilizer away. 
13.    To remove the stabilizer between the objects saturate a sponge with water and give a dab. You can wash the ready embroidered item by hand. 

embroidery-on-terrycloth-03.jpg.efbc75b6

Embroidery on terry cloth: Second option 

1.    Using the printed template, mark the center of the embroidery on the towel. 
2.    Add a layer of spray adhesive on tearaway non-adhesive stabilizer. 
3.    Hoop your stabilizer and screw tightly. 
4.    Stick your terry towel onto the stabilizer. 
5.    Put the water soluble stabilizer on top of it. 
6.    Secure the towel and water soluble stabilizer with pins. 
7.    Set you hoop into your machine and embroider the design.
8.    After the embroidery is completed, remove the top stabilizer and the underlay. 

embroidery-on-terrycloth-04.jpg.a6e71790

See the video here

Irina

Original text by: Nata Beloshveika

Many of you have received big orders for t-shirts embroidered with logos. Sometimes rehooping takes more time than the embroidery process itself. I mean, the embroidery has to be in the same place on all items, if possible. 

So what do we do? Should we do the measuring and marking every time? But it is quite a laborious task, and boring, too. 

A solution exists! I want to show you my way of doing it. 

Embroidery on t-shirts. Materials and tools

  • A t-shirt 
  • A machine embroidery design
  • Upper thread
  • Underthread
  • Double-sided adhesive tape
  • Printing paper 
  • Embroidery stabilizer (Filmoplast) 
  • A ruler or a triangular 
  • Tailor's chalk, design knife, scissors 

Embroidery on t-shirts. The making process: 

I create all my designs by myself. 

Previous to the beginning of the embroidery I run a guide stitch 5-7 mm away from the contour. Hoop one layer of printing paper. Run the guide stitch without a thread. Carefully cut out a window in the paper along the stitches with the knife. Stick a double-sided adhesive tape around the perimeter of the window. Take off the first layer of adhesive. 

embroidery-on-t-shirts-01.jpg.1b69fb08ee

Now I'm going to mark out the placement of my future embroidery on the first t-shirt. To do this I measure the front side and mark the bottom left corner of the design with the chalk. 

embroidery-on-t-shirts-02.jpg.3e4b04cbfa

Onto the marked t-shirt I put a layer of printing paper in order to create a template for hooping other t-shirts. I draw all the necessary outlines there — neck hole, shoulders, arm-holes (for small size t-shirts, because the L-size ones will not fit into the A4 format), central line or placket line for a polo shirt. Also I mark the left corner of my future design with the cross. 

embroidery-on-t-shirts-03.jpg.7047bb3c96

Then I put the hoop on top of it, so that the cross on my template would be exactly in the lower left corner of the hoop. 

This is important! 

You should make sure that the hoop lines to the template and the t-shirt — check horizontal and vertical marks (vertical are very handy for checking against the knitwear loops), so that it would not move. 

embroidery-on-t-shirts-04.jpg.0181411009

embroidery-on-t-shirts-05.jpg.7370c0285e

Then I trace the hoop contour (it's better to use a felt pen to make the lines visible of the wrong side of the template) and cut out the template along the construction lines (neck line, middle, arm hole). The template is ready! All of this has been a preparation job. Now we proceed to the hooping. 

embroidery-on-t-shirts-06.jpg.067d39ba35

I cut a piece of filmoplast, so that it would cover all the adhesive tape frame. Stick it onto the adhesive tape, take off the protection layer. 

embroidery-on-t-shirts-07.jpg.a5401bca5d

I take the t-shirt inside out and put the template on top of the left (!!!) half of the t-shirt. Then I superimpose the neck hole, the central line and the arm-holes. Put a hoop on top of it (with the layer of adhesive facing down), superimposing the hoop and the template. 

embroidery-on-t-shirts-08.jpg.cbea4f1377

Carefully remove the template from under the hoop, so that it would not move. Once again carefully (the hoop must not move in relation to the t-shirt) fold the t-shirt around the hoop — first the sleeves and then the bottom. 

embroidery-on-t-shirts-09.jpg.4527f87650

embroidery-on-t-shirts-10.jpg.c836190f35

embroidery-on-t-shirts-11.jpg.eef631861d

Then I turn the whole thing over and stick filmoplast to the t-shirt, smoothing it out with one hand. Carry it to the machine, without turning it right way round. 

Having unfolded the hoop on the side where the screw is, I set the hoop into the embroidery machine, smooth out the t-shirt under the foot and turn it the right way round to open the embroidery area. 

Now I begin to embroider. After having completed I take off the hoop from the machine and carefully unstick filmoplast from the adhesive tape. 

embroidery-on-t-shirts-12.jpg.c72aae1bf8

And after that I begin this all over again — stick filmoplast into the hoop, put a template on the t-shirt, stick the hoop to the t-shirt and embroider. All this is done very quickly and the result is of a high quality. I wish you the same! 

embroidery-on-t-shirts-13.jpg.6bc495456b

 

Irina

Original text by: Olga Ionova

This master-class will tell you how to do cutwork embroidery. Cutwork embroidery has its own aspects, and if the design is beyond the hoop so that you have to join its parts together, the amount of the aspects doubles. This master-class will tell you how to do cutwork with alignment and border designs without the special hoop, but with the help of alignment stitches instead. 

Cutwork embroidery. Materials:

•    Fabric or an item to be embroidered 
•    Tearaway stabilizer 
•    Water soluble stabilizer (film)
•    Upper thread (white)
•    Underthread (white)

Cutwork embroidery. The making process

Prepare your fabric. Iron it and press the tearaway adhesive to the wrong side. 

cutwork-with-alignment-01.jpg.1fa7c435f3

cutwork-with-alignment-02.jpg.816e6eaae4

In keeping with the design do the marking. Mark the fabric in accordance with the plastic pattern of your hoop. 

cutwork-with-alignment-03.jpg.88811f7c29

cutwork-with-alignment-04.jpg.6eb7d802d0

cutwork-with-alignment-05.jpg.0eb5fbe986

Tightly hoop the fabric and the stabilizer. You can add pins, too. Cutwork embroidery design must include several colors, which will mark the places for your machine to stop. 

cutwork-with-alignment-06.jpg.987fbe25b0

cutwork-with-alignment-07.thumb.jpg.1c37

The first color will be a Ran stitch, also zigzag may be added. Having embroidered the first color, stop the machine and take the hoop off.

Marked are the areas that will be cut out. These are always enclosed areas. 

Don't unhoop the fabric! It must stay in the hoop. 

cutwork-with-alignment-08.jpg.ef9145410e

cutwork-with-alignment-09.jpg.e8e99f1bd7

cutwork-with-alignment-10.jpg.04d3f3d227

With the help of scissors cut away the areas inside the objects from the stitching, trying not to damage it. Use the stork embroidery scissors or the ones that were specially designed for cutwork. 

cutwork-with-alignment-11.jpg.8b49f4d37e

cutwork-with-alignment-12.jpg.594ff28c28

Put a layer of thin water soluble stabilizer on top of the fabric and secure it with pins. Set you hoops in your machine run the embroidery with the second color. 

cutwork-with-alignment-13.jpg.7b1038b2e6

cutwork-with-alignment-14.jpg.c0fa2338b9

The embroidery consists of finishing the open areas with zigzag stitches and later with satin columns, while water soluble stabilizer is used as a substitute for the fabric. It holds the fabric and the cut-away details together. 

cutwork-with-alignment-15.jpg.e4808a5ef8

cutwork-with-alignment-16.jpg.5468303384

The order of cutting and finishing depends upon the programmed sequence. The details here should be cut away and embroidered one after the other. 

cutwork-with-alignment-17.jpg.4cefa54117

cutwork-with-alignment-18.jpg.39bf2dabe4

Embroider all the details as was described above. 

cutwork-with-alignment-19.jpg.36fa4197ba

cutwork-with-alignment-20.jpg.19da7732e9

cutwork-with-alignment-21.jpg.28e27e085e

Embroider all the elements of the design. 

cutwork-with-alignment-22.jpg.83f1c9985b

cutwork-with-alignment-23.jpg.20ab91158e

Cutwork embroidery. The alignment of the elements 

When embroidering borders or repetitive design patterns you have to do the alignment. Therefore, draw the central line while doing the preparations. To get the exact match between the different parts the design must contain the alignment stitches and crosses (dots and lines). In the first part of the embroidery they are embroidered the last. The alignment spots marked violet on the photo. 

cutwork-with-alignment-24.jpg.02f8f95c9d

cutwork-with-alignment-25.jpg.0c66b10d95

If you add the alignment crosses by yourself (it can be done in any embroidery software editor), mark them with different color from that of the last part of the design. 

You can mark the places where the needle will hit the alignment crosses by moving down the balance wheel, but not perforating the fabric. This works extremely good for leather. 

The last part of the embroidery before next may include tacking down the first object of the part that will be hooped next. You can use this stitch as an additional alignment mark. 

cutwork-with-alignment-26.jpg.fd90539e9b

cutwork-with-alignment-27.jpg.755d2d95bc

Cutwork embroidery. Rehooping 

Take the embroidered detail out and press it flat, moving the iron carefully up and down. Never use steam! 

cutwork-with-alignment-28.jpg.b4b3eb87a5

Hoop the next part of the fabric to be embroidered in accordance with the marking and the hoop pattern. 

cutwork-with-alignment-29.jpg.ff4f47523d

cutwork-with-alignment-30.jpg.37321afa9a

Set you hoops in your machine and make sure that the first is the color of the alignment crosses. All alignment spots must match! You don't have to embroider them, just move the balance wheel down and see if the needle hits the marks. 

cutwork-with-alignment-31.jpg.4a5a36f23b

cutwork-with-alignment-32.jpg.d662824b66

After that the embroidery will go as was described above. 

cutwork-with-alignment-33.jpg.163eac6d86

cutwork-with-alignment-34.jpg.424e4e783f

Having completed the embroidery, unhoop the fabric. Cut away the excessive water soluble stabilizer on both right and wrong side. 

cutwork-with-alignment-35.jpg.161721ef2a

cutwork-with-alignment-36.jpg.e878d7b608

Tear away the tearaway adhesive stabilizer.

cutwork-with-alignment-37.jpg.306ddfb0fc

cutwork-with-alignment-38.jpg.53a8a80cfe

Wash the water soluble stabilizer in the warm water until it will go off completely. 

cutwork-with-alignment-39.jpg.3fd59d5e43

cutwork-with-alignment-40.jpg.deed99c200

Dry the embroidery until it becomes only a bit wet. 

cutwork-with-alignment-41.jpg.7c6bf2aadd

cutwork-with-alignment-42.jpg.06d759f78d

cutwork-with-alignment-43.jpg.eda5044351

Press your embroidery on something soft like a folded terry towel covered with a thin cloth. Press the embroidery flat in up and down motions only! Never move an iron side to side or back and force. 

cutwork-with-alignment-44.jpg.055d138f78

cutwork-with-alignment-45.jpg.8ab38cca68

It's done! 

 

 

Irina

Original text by: unknown

If you are reading this article, it means that your interest for machine embroidery has overcome the beginner stage, and you have decided to master the embroidery software to choose the right one for creating cross stitch patterns. A lot of manufacturers, in order to increase embroidery editor capability, add a software module that allows creating cross stitch patterns and saving them into the formats recognized by the embroidery machines. What are these software products you'll learn from this article.

I want to bring to your attention the fact that in this review I only point out those software products that allow creation of cross stitch patterns for embroidery and sewing and embroidery machines. Also note that you'll find only the widely known software products on this list, for I skipped the lesser known ones.

Creation of the cross stitch patterns

Creating cross stitch patterns for embroidery machines, on one hand, is the easiest of all digitizing tasks, but on the other hand, the most complex one. It depends on the principle of creation: whether a designer will work with ready patterns or create the new designs completely out of his head or using the images (such as photographs) of his own.

cross-stitch-software-01.jpg.a9ab41f65a7

Fortune favors a designer that has decided to try and digitize a ready pattern. There is no need to think about such design characteristics as basting, density and pull compensation. There is no need for using imagination to convert a photo into a cross stitch pattern. One just needs to figure out what types of cross stitch there are in hand embroidery, which ones can be created in the software, and after having mastered the tools, to create stitches one by one.

A designer that wants to create cross stitch patterns from images or photos has to face all the problems with color scheme, stitch types and their size. This requires a creative approach and artistic thinking.

To be through with the embroidery software once and for all, you need to understand that it comes in standalone editors and also built-in modules. I don't want to throw my weigh around and influence your decision, and yet I want to make some comments about the usefulness of various software products.

cross-stitch-software-02.jpg.5f709c5b691

The software for creation cross stitch patterns falls into two main categories:

1. Standalone editors

Of all the software meant for creation of cross stitch patterns and conversion of the files into the format recognized by embroidery machines we can single out two products:

•    PatternMaker for CrossStitch
•    CrossStitch Professional Platinum

Both of these software products were designed for creating hand embroidery cross stitch patterns, and only later the manufacturer added an option of saving the result in a format recognized by an embroidery machine. Although both of these editors were designed for creating hand embroidery cross stitch patterns and have practically all the tools for creating machine embroidery designs, in my opinion, CrossStitch Professional is slightly superior to PatternMaker. Notably, the latter of the two lacks an option of saving most of the special stitches (cross stitch) into a format recognized by a machine.

cross-stitch-software-03.jpg.71f300ffbe0

Both software products work with scanned patterns as well as process images automatically and create designs with the help of the tools.

2. Additional modules

Nearly all big embroidery editors have additional modules that allows creating cross stitch designs. Sometimes they come as an in-built solution, sometimes you need to buy them separately.

Embird (bought separately) has an automatic conversion tool, and also an option of fitting the scanned patterns into the open documents to make the process of creation more easy. You can also create cross stitch patterns with tools. Conversion of the special stitches is present.

Wilcom ES – has an automatic conversion option, is able to create cross stitch designs from scanned pattern and has tools for object creation. There is also canvas changing option and the possibility to set the stitch count. The capabilities of the software are sufficient for creating cross stitch patterns, but one would wish more operational comfort.

Bernina ES (in-built) — practically the same as Wilcom ES.

Digitizer MBX/Pro (bought separately) — practically the same as Wilcom ES. They cost about $160-200 each.

PE Design (in-bulit) – this software had an automatic conversion option, and you can also work with scanned patterns. Creation of the cross stitch patterns with the help of tools is not the best here.

Compucon EOS — automatically converts images into cross stitch patterns and also has tools for creating objects with cross stitch fill.

Tajima DGML by Pulse (in-built up to v. 14) — starting form the next version there is no automatic conversion tool. The software only has a tool for creating objects with motif fills and also one for creating cross stitch lines.

Which software product to choose for creating cross stitch patters, is entirely up to you!

Irina

Original text by: Irina Lisitsa

To demonstrate the process of making an openwork embroidery I chose two-thread french terry, because this type of knitwear is stable, trimming distorts it very little, and therefore, is perfect for this machine embroidery technique. You can do this on any sewing or embroidery equipment. The making process is the same as with openwork and cutwork embroidery on any other fabric. This master-class will help the beginners to understand that embroidery on knitwear is not all that difficult. 

Materials:

•    Knitwear fabric (0.3 mm two-thread french terry)
•    Tearaway adhesive, either Stiffy 1860B or 1640B
•    Water soluble film 
•    Upper thread
•    Underthread
•    Machine embroidery design (download or buy one from our shop) 

Openwork: The making process 

Stick a tearaway adhesive of an appropriate density to the wrong side of your fabric. Hoop the stabilized fabric and turn in the screw. 

openwork-on-knitwear-01.jpg.056f817894be

openwork-on-knitwear-02.jpg.dab5235785e7

Embroider the first color of your design (usually it is the stitch, which will outline the future design and mark the areas that will be cut out.

openwork-on-knitwear-03.jpg.9ce4f8f77ecf

openwork-on-knitwear-04.jpg.a32c3e6b5e29

openwork-on-knitwear-05.jpg.c861f050322e

Take the hoop off the machine and make small incisions in the center of an embroidered area, using scissors, a razor blade or a ripper, then cut away the bits of fabric with scissors. 

Put a thin layer of a water soluble film on top of the fabric and secure it with pins. 

Be careful not to put pins into the embroidery area. 

Set you hoop into your machine and continue the embroidery. 

openwork-on-knitwear-06.jpg.85fa4e0da2de

openwork-on-knitwear-07.jpg.761fe39a180d

openwork-on-knitwear-08.jpg.9eaa8e399576

After having embroidered the design, remove the stabilizer leftovers from both the right and wrong side of the item. Press the embroidery on the wrong side, on several layers of terry towel, so that the embroidery would preserve its density and not become flat. 

openwork-on-knitwear-09.jpg.10fd805fa0e9

openwork-on-knitwear-10.jpg.9813adcf4a46

openwork-on-knitwear-11.jpg.04b2e8149988

Your openwork on knitwear is now ready! 

Irina

Original text by: unknown

Every embroiderer has been in a situation where an embroidery machine that was running smoothly only a day before, suddenly begins to break the upper or the underthread almost every stitch. Such a problem, in case you eliminate the possibility of mechanical breakage, is connected with certain processes, and also with the quality of the embroidery materials you use in your work. If such a situation occurs, try to solve the problem yourself before calling a service engineer. In this article we tried to describe possible problems and their solutions, ranking from the easiest to the complex ones. Resume the embroidery process after having done this or that, to check if the problem has disappeared. 

reasons-for-thread-breakage-01.jpg

Why does the thread breakage occur 

  • Upper thread 
  • Underthread 
  • Stabilizer 
  • Needle 
  • Shuttle 

1. Upper thread

Tension regulation. Check your upper thread tension. Often the reason for the thread breakage may be too tight a tension. 

reasons-for-thread-breakage-02.jpg

Wrong threading may be the reason for thread breakage, too. In this case rethread your machine in accordance with the manual. 

An upper thread of poor quality. If breakage occurred after replacing the upper thread, get back the bobbin you used before that. If breakage stops, buy embroidery threads of some other brand.

Rayon thread. This thread often causes thread breakage trouble for beginners. Threads literally "leap off" the bobbins. This problem is very easily solved. Place a grid on the bobbin case and reduce the embroidery speed. 

reasons-for-thread-breakage-03.jpg

Metallic thread. When working with this thread use a special grid, set a needle for metallic threads, and also reduce the embroidery speed. 

2. Underthread 

reasons-for-thread-breakage-04.jpg

The wrong size of the bobbin. However strange it might seem, such a problem exists. Check your manual to see what type of the bobbin is recommended for your machine. 

Wrong winding may become the reason for thread breakage, too. In this case unwind the bobbin and rewind it after that. 

Wrong threading. One of the common reasons for thread breakage. Carefully read that section in the manual that describes how to insert the bobbin, and do accordingly. 

Thread thickness. One of the well-known reasons for thread breakage. Some of the sewing-embroidery machines just won't work with a very thin bobbin thread. In this case you should get a thicker thread. 

All sewing and embroidery threads have their own thickness, determined by the number. The greater the number is, the thinner is the thread, and vise versa. For example: An upper thread #200 is thinner than #30 

3. Stabilizer 

reasons-for-thread-breakage-05.jpg

Glue particles adhere to the thread and the needle, holding back their movement, which causes the thread to break. If that's the case, stop the machine, clean the needle with alcohol, and rethread. Repeat every time your thread breaks until the embroidery will be completed.

After that refrain from using this particular type of adhesive stabilizer or spray adhesive in your work. 

On the internet you can find many recommendations on the original use of various materials. You can count the use of double adhesive tape and sewing stabilizers, which are not manufactured specifically for our purpose and may cause thread breakage. The problem itself, together with the solution, was described above. 

If the cleaning does not help and the thread continues to break, stop the embroidery and change the stabilizer. 

4. Needle 

reasons-for-thread-breakage-06.jpg

A bent needle, burrs and a blunt needlepoint may also be the reason for thread breakage. In this case change the needle to a new one. 

Also if the needle type is wrong for the particular kind of fabric, this may lead to the thread breakage, too. Read the information on how to choose needles, in our future articles.

5. Shuttle

reasons-for-thread-breakage-07.jpg

In some embroidery machines the bobbin case used for the embroidery is different from the one used for sewing. If you have encountered the problem with thread breakage, check the one that is currently in use. 

Burrs on the bobbin case are often the reason for the thread breakage. Take out the case and inspect it. If there are burrs and scratches present, polish them with a soft abrasive cloth. When it will be possible, buy a new bobbin case. 

Scratches on the throat plate caused by the needles hitting it may lead to the thread breakage. Inspect the throat plate from above and from below, and if you find burrs and scratches there, think of buying a new one. 

 

 

Irina

Original text by: Irina Lisitsa

The Hardanger embroidery is an ancient Scandinavian hand embroidery technique, which involves counted satin stitches, because the design is created by the parallel stitches that run along the straight lines. There is something from hemstitch in it, too, because one part of the fabric base is later removed. Traditionally the Hardanger embroidery was used to decorate dresses and costumes of the Norwegian beauties. As any other hand embroidery technique, Hardanger requires a lot of embroiderer's time and patience. With the development of new technologies and embroidery equipment the Hardanger technique became much easier and quicker to accomplish. 

This master-class shows the order in which you should embroider the elements of the Hardanger design, so you could decorate your house with a Hardanger pillow. 

Hardanger. Materials:

•    The main fabric 
•    Tearaway adhesive stabilizer 
•    Upper thread 
•    Underthread 
•    Water soluble stabilizer 
•    Machine embroidery design (hardanger) 

Hardanger-01.jpg.1cfc0eca0b2b2ac3cc36389

Hardanger. Embroidery process

Print your design patterns on your printer. Stick your tearaway adhesive stabilizer to the wrong side of your fabric. Organize the printed designs on your fabric the way you like. Mark the center of each design. 

Hardanger-02.jpg.dec3ca43d25bf7910f1c675

Hardanger-03.jpg.df9ea119cadc74f2b024fe7

Hoop the fabric in accordance with these center marks. Set you hoops in your machine and load the design. It is more convenient to embroider from the center of the design to the edges. 

Hardanger-04.jpg.36e21151db20783515c3ac9

Hardanger-05.jpg.57ffd08a1d55a4bd93174f4

The first stitch will mark the area of your future Hardanger embroidery. Put a piece of a thin water soluble stabilizer onto this first stitch, the second stitch will secure it on the fabric and will allow you to cut away the pieces where the Hardanger stitches will be. 

Hardanger-06.jpg.25fe44854e8c01cf1854735

Hardanger-07.jpg.cab1aaf031f534b097151a8

After having secured the water soluble stabilizer on the fabric by a narrow zig-zag stitch, take the hoop off your machine and turn it wrong side to the top. Make an incision through the fabric and the stabilizer, but leave the water soluble stabilizer intact. Cut out the area where your Hardanger embroidery will be, trimming the fabric near the stitches.

Hardanger-08.jpg.faa499574b786c8d607cdcf

Hardanger-09.jpg.3bc845d60693b45c5b38272

After having trimmed the extra fabric, set you hoops into the machine and finish your embroidery. 

Hardanger-10.jpg.febbc8cc3cb8cabdabd6b65

Hardanger-11.jpg.480d9ea6a2b330f69c1ce34

When embroidering, don't forget to change the thread, using the color map that goes with the design. 

Hardanger-12.jpg.7094b916fd3f49c93fda70f

Hardanger-13.jpg.8b6c7aec738976d6997f4e6

Repeat the embroidery process for the other parts of your design. After the embroidery is completed, rinse it with the sufficient amount of warm water or wash the ready item without the use of laundry detergents. 

Hardanger-14.jpg.81445ebb2028932a5b92043

Hardanger-15.jpg.258af8cbfe51893c4779295

Hardanger. Assembling the front side 

When the embroidery is completed, wash your item sparingly and dry it slightly, then smooth the embroidered part with an iron. To make the pillow, cut out two pieces of fabric of two different colors, 5 and 8 cm wide. Sew them together, press the seam allowances to the darker colored side. Then sew these two strips of fabric on both sides of the central detail on your pillow. The front side is ready, now all we have to do is to sew the back side. 

Hardanger-16.jpg.1bc77551a4957a93a21c5ce

Hardanger-17.jpg.63f6a9f5812dbb996e731cf

Hardanger-18.jpg.b509188fdbee8a8cf6920da

The pillow decorated with Hardanger embroidery is ready! 

Hardanger-19.jpg.4966a03e1b6b35e20407550

 

Irina

Original text by: unknown

Everything has its reason, and it is good when these reasons can be analyzed and understood and mistakes prevented before the material has been hooped and stabilizers, fabrics, threads and, what's most important, time have been wasted.

Are you familiar with the situation when you overexert yourself, but all you get is an ill-looking embroidery with objects dislocated and the fabric pulled? How to prevent it? 

embroidery-quality-01.jpg.2de3da71f41876

On the quality of machine embroidery

Problems with a design 

One of the reasons of a bad embroidery is a low quality design. The main signs of the low quality design are: the lack of basting where it is needed, large quantity of stitches that are too short or too long, and also Tatami fill, which is the result of an automatic processing (90% of the designs created automatically are of poor quality and can be more or less normally embroidered on dense, well-stabilized fabrics).

If you come across such a design, the result will most probably be deplorable.

embroidery-quality-02.jpg.dfd156c30e58bf

embroidery-quality-03.jpg.34c6cfd61b9b74

embroidery-quality-04.jpg.19c0afcef1c00d

The reason for this are the mistakes made by the designer in the process of digitizing a design or the ones made by the user in the process of altering it. 

Identify a low quality design 

How to do it? In future, when you gain sufficient experience, you will discern problems in a design at the first glance. 

Problems with embroidery technique 

You have made some mistakes when preparing a design and then embroidering it, which resulted in a work of poor quality. Like using a stabilizer in a wrong way or embroidering a design on a wrong type of fabric. For example, a beginner may embroider a dense design on leather. As a result, the embroidery may just fall out, because numerous needle perforations will separate the embroidered piece from the rest of the fabric. 

Another embroidery technology mistake is loose hooping.

The choice of a needle also may influence the quality of your embroidery. This particularly concerns embroidery on thin knitwear or such materials as leather, faux leather, upholstery fabrics and coated fabrics.

Sure, you won't always have to put up with fabrics that give you problems, but you need to consider fabric+needle+thread in any case.

embroidery-quality-05.jpeg.ac91a211cb1b8

embroidery-quality-06.jpg.a4c436bd9af6f0

embroidery-quality-07.jpg.63b434ea7e0918

For example, beginners and even experienced embroiderers often encounter a problem with embroidery on a perforated fabric or knitwear, because a thin and sharp embroidery needle only cuts the threads up. You should use a thin ballpoint needle for knits when working with such fabrics. 

Leather, especially cordovan or the the thick one used for belts, should be embroidered with leather needles, and the use of designs such as Blackwork or Redwork, where stitches are sparse, is preferable.

Disregard for the rules of embroidery making may lead to a disagreeable result. For example, in case when a thin film, which is intended to be used as an upper stabilizer, is used as an underlay for a fabric or a main stabilizer for lace. 

Preparing for embroidery you should choose your stabilizer properly and carefully read the manual. 

embroidery-quality-08.jpg.38357e73621fc5

embroidery-quality-09.jpg.5a13b60af9a5e8

A very common mistake is to hoop the fabric in a wrong way. When the fabric is loose, there are creases and cramps on it. And of course, you'll get a defective result, even if the design is good. To get a neat embroidery, with an even fill and without any creases and shifting of the details, you need to press the fabric beforehand, in order to stabilize it properly, to straighten the fabric in the hoop (try not to overdo it!) and to tighten the hoop screw so that the fabric would not move.

Another mistake made by many embroiderers, especially those who just begin to learn the technique by themselves, is embroidering a dense design on knitwear. Despite using a stabilizer an embroidery does not look good, because the fabric is pulled at the edges, and the embroidered area is much more rigid than the rest of the fabric, to the point where it seems like a piece of wax. If you have embroidered right on the item, without doing a test piece first, your favorite pullover or your client's jacket is ruined.

embroidery-quality-10.jpg.d296905bb452e6

To avoid problems like that choose the fabric that matches your design in density.

Problems with equipment 

If your machine breaks the thread 

embroidery-quality-11.jpg.58d2f17125b8b7

•    The main reason for it may be an accumulation of thread fragments and lint in the tensioner and also the dirt under the throat plate. 
Take off the top that covers the lamp (you won't lose your guarantee, but will be able see everything inside) and inspect your machine carefully (you can use a magnifier). If you find fragments of threads and other litter, remove them. 
•    One more reason for the thread breakage is the poor quality of embroidery threads.Try the threads of some other brand and see how they work in your machine.
•    The third reason for thread breakage are needles. The needles need to be replaced from time to time, because they wear down. It's not very economical to replace them often, but if the thread breakage continues, it's time to do it, because there may be a burr in the needle's eye.
•    Also the thread may break because of adhesive. Even adhesives specifically manufactured for machine embroidery may, if applied in large quantities, stick not only to the fabric, but to the needle, too. Lint accumulates, the thread gets stuck in it and breaks as a result.

Clean your needles with a cotton swab dipped in alcohol and try to apply less adhesive in future.

Too much stabilizer

embroidery-quality-12.jpg.6113ae0894d61e

embroidery-quality-13.jpg.2d00bb485dce26

embroidery-quality-14.jpg.892eff172a07d5

In some cases, such as embroidering a painting, you need it to be very dense, but a thin stabilizer or several layers of printing paper, which is used by many money-saving embroiderers, adds friction, so when the thread goes through a lot of layers, it becomes frayed and eventually breaks. What is the most unpleasant, the thread may be in this state for a while, and the machine won't signal its breakage, and the embroidery will be done incorrectly for a long time. 

This won't happen if you choose a stabilizer of an appropriate density

Too loose or too tight upper thread or underthread tension may have a negative impact on the quality of the embroidery. Underthread may show on the right side and ruin the look of your design. You need to regulate it, either by yourself, following the instructions in your manual, or with the help of a service engineer. 

Loops on the wrong side usually appear when the upper thread is loose because it did not get between the tension discs. Some models have their own way of threading: in some the foot must be up, in the others — down.

In order to fix it you need to rethread the machine, in accordance with the manual. 

embroidery-quality-15.jpg.3205d45473197f

The automatic trimming between the objects does not always have a good impact on the design. For example, it's better not to trim a cross-stitch design that has numerous individual crosses lying very close to each other. In case of automatic trimming the you'll get a thick fringe of thread ends and the machine will have trouble embroidering. 

Each case requires a unique approach, depending on the design, and you should turn down the automatic trimming option if needed, either in the software or in the machine. 

This is an incomplete list of embroidery technique irregularities and the reasons for low quality output. Beginners sometimes get rather inventive. Nevertheless, if you read this and learn to avoid some mistakes, the success is guaranteed.

We wish our readers to accomplish only the best quality while embroidering!

embroidery-quality-16.jpg.f2572bcb0099e3

embroidery-quality-17.jpg.9af222c10e959e

embroidery-quality-18.jpg.d41e6469cd30bb

Irina

Original text: unknown

Good afternoon! Among the lovers of the machine embroidery there are those who prefer step-by-step tutorials, master-classes and other guidance materials, and there are also the ones who try to master the great variety of working practices all by themselves. For whose who are on the brink of engaging into learning machine embroidery techniques by themselves, here's a little bit of advice. 

The phrase "learn by yourself" does not mean "turn a blind eye to all that has been previously written on the subject", but "to use what has been previously written and to fill the gaps". 

Learning machine embroidery technique by yourself 

What you should notice when mastering the technology of embroidering on a specific type of fabric. 

The fabric and its characteristics 

You should know the fabric you are going to work with. Learn, if only superficially, its characteristics. Whether is stretches or not. Whether it is loosely or densely woven. Whether its surface is smooth or piled. 

If we are talking about using machine embroidery techniques on different types of fabric, I'd like to name it "Machine embroidery on the types of fabric that give you trouble", because in most cases embroidery on a densely woven smooth-surfaced material does not you cause any trouble at all, even the chosen design is a bit too dense.

beginning-themselves-01.jpg.dae8ff00be5b

Stabilizers and hooping methods

First of all, learn the main types of stabilizers in existence. We have already described various types of embroidery stabilizers and where to use them; also you can search our forum for tips. Try to figure out what type of stabilizer will be better for you fabric. Whether you should use a water soluble stabilizer or not. Whether you need an underlay and of what kind. When to use a tearaway stabilizer and when a cutaway will be better. Whether you should hoop the fabric or better go without it. 

Needles and threads 

You have probably noticed that many needles for machine embroidery and sewing are made for specific purpose. There are omni-purpose needles, embroidery needles, also needles for metallic thread, silk, woolen fiber etc.

First, learn the materials available and then use what you have. Perhaps, the main recommendation on using needles will be as follows:

You should not use expensive needles when working with densely woven fabrics that do not cause trouble, and when working with delicate fabrics such as silk or calico you should not use the same needles as you do for densely woven ones. Try to use rare and expensive needles for their intended purposes. 

The threads come in different types, too, and each of these types has its own usage recommendations. The main types of thread are polyester, viscose rayon, wool and cotton. The last two are the common polyester threads without luster, but with the addition of wool and cotton. Try using different threads with different types of needles available in your machine. 

beginning-themselves-02.jpg.88fd983f519d

When choosing which ones to use pay attention to the width of needle's eye and thread thickness. When you use a thick woolen fiber, you'd better not choose a narrow needle's eye. 

And so, gradually, you will understand, whether you should use a thick thread when embroidering on silk if you cannot use a thin needle with it. Whether you should choose a big eye needle when working with a thin thread. How many needles for silk will you need to embroidery a dense design on the tarpaulin... 

The Designs

For a beginner all machine embroidery designs look the same. Beginners don't pay attention neither to the density of the design nor to filling characteristics. They don't yet know what the words "satin", "tatami" and "motif" mean. But such a situation won't last long. After having embroidered a dense chevron on a thin knitwear and having got a "bulletproof vest" as a result, or having embroidered a rare stitch on a terry towel you will understand that you should pay attention to design characteristics. To understand how a satin column pulls the fabric, how the tatami behaves, what restrictions apply to the stitch designs and where they will look good and harmonious. 

We will definitely write about all this in our blogs, and meanwhile we suggest that you embark on a journey of learning the machine embroidery techniques by yourself.

Irina

Original text by: Lisa Prass

The problem of splitting a design emerges when a beginner understands that his (her) embroidery machine does not recognize the design only because it exceeds maximum size and does not fit the largest hoop that comes with the machine. Or, it fits the giga hoop, but the machine still fails to recognize it. If you have encountered such a problem, this article is for you.

splitting-a-design-01.jpg.fe33fb02775362

Splitting a machine embroidery design

First, I want to mention that here we'll discuss only the machine embroidery designs saved in a stitch format. The ones that you have downloaded from our site or got other sources. It is the format your machine can recognize, and if it cannot, change the format into the one your machine can recognize and then continue reading this article. Got it? Splendid! So, you have a machine embroidery design in a format that can be recognized by your machine, and this design exceeds your maximum embroidery area.

Maximum embroidery area

Beginners are often surprised by the fact that even if they have a giga hoop and design that fits, their machine still fails to recognize it. The problem is that the machine has such a parameter as maximum embroidery area, and if the size of a design exceeds it, it does not matter whether you have a giga hoop or not. The size of the maximum embroidery area is determined by the manufacturer, and the machine cannot go beyond that. Therefore, if a design is bigger than specified, you will have to split it. Giga hoops are just a tool for embroidering designs beyond the maximum embroidery area. You can find out the size of your machine's maximum embroidery area in the manual.

If all written above is clear, let's proceed...

Splitting a machine embroidery design

So, the size of your design goes beyond the specified limits, therefore, you have to split it and embroider stage by stage. This assumes that you have some embroidery software on your computer and also the experience of working in it.

How the design will be split in many ways depends from the design itself. You should approach each case individually. I don't see a decision that could satisfy them all, and describing every single one of them seems futile to me. We'll better look into them in our next articles. I may just say this: you'll encounter problems while splitting a design only in the beginning. Having split 2 or 3 designs, you'll understand the whole process much better. You also learn all the nuances.

When splitting a design and placing it in the hoop like the picture below shows us, you should bear in mind that the hoops must superimpose, otherwise there parts of the design won't match. Part of the design situated in the hoop must be a bit smaller than the hoop itself, so that in case of unsuccessful hooping you could move or turn it, to align with the previous part.

splitting-a-design-02.jpg.5c66e8004754f9

Aligning a machine embroidery design

Any case of splitting a design assumes the future alignment. A similar process goes between the two apparatuses on the satellite trajectory.

But in that case the alignment is done by a special mechanism, whereas in machine embroidery the two parts of the same design are aligned with the help of alignment stitches, of which we will tell a bit later.

There are two main ways of aligning parts of the same design:

•    Alignment in giga hoop
•    Rehooping the fabric

The difference between these two ways is only that in the first case you join two or three parts of the design with the help alignment stitches and without rehooping, whilst in the second case you align the parts of a split design with the help of alignment stitches, but still need to rehoop every time.

About the alignment stitches

There are different kinds of those. They can come in the shape of a border stitching or straight lines going across the embroidery area or special alignment crosses. Everything the embroider's imagination can produce.

But regardless of their type, the alignment stitches are used only temporarily and are deleted after the completion of a design.

splitting-a-design-03.jpg.2626c99a21400b

The alignment stitches are added in the embroidery editor either automatically or manually by the user. How it is done depends on the software that is currently in use, its possibility to save the design for giga hoops, the alignment method and your own wishes.

The alignment stitches must be present in both parts of the design. The embroidery process goes like this:

1. Do the first part of the design.
2. Embroider the alignment stitches.
3. Rehoop your fabric or change the position of your giga hoop.
4. Join the alignment stitches.
5. After the perfect match is achieved, you do the second part of the design.
6. Repeat the process the necessary number of times.

In my opinion these are the main points on splitting a design and its future alignment when embroidering.

In conclusion I want to bring to your notice a problem, which the owners of the old machines or the beginner level machines can encounter.

Splitting a design by layers

There can be situations when the machine does not recognize the design even if it does not exceed its maximum embroidery area. This usually happens with the designs that have many colors and large stitch count. The machine simply is not able to read such an amount of information from one file. Photostitch designs are notorious for that. Nowadays, with all the contemporary machines such occurrences have become quite rare, but if you use the equipment made at the dawn of the previous century you might encounter a problem. The design is split into 2 or 3 part to be embroidered one by one. You don't rehoop the fabric. The design is embroidered without moving. For example, a design has 25 flowers which will be embroidered one after the other, in this case the 1st file will contain first 15 flowers, and the 2nd one — the remaining 10.

splitting-a-design-04.jpg.d6e4e25a1454e4

Irina

Original text by: Lisa Prass

So, you have created or downloaded a machine embroidery design that does not fit you hoop. Now, to embroider the design, you should take a series of actions to split it. In this lesson I will show you how to split a design, how to add the alignment stitches and crosses, and how to save it into two different files, using a "Stitch" machine embroidery design in Photostitch technique as an example. The process includes several basic steps...

Splitting a design: creating and positioning of the hoop 

Using the Rectangle tool, create additional objects that will imitate your hoop. Place them in the embroidery area so that your machine embroidery design would be within these virtual hoops. If you don't like what you see, change the position of the hoop until you will achieve the result you want. 

splitting-in-pe-design-01.png.e6028db430

The hoops for which you split your design must have an intersection (remember what you learned about the intersection of sets at school?), otherwise the alignment with the help of crosses will be impossible.

Splitting a design: how and where? 

The main task of splitting a machine embroidery design is that the separating lines must not be seen when embroidering. Therefore, you should understand where it is better to split an object and whether it is possible to get along without splitting. Learn to split so as to hide the separating lines under the last embroidered objects. After splitting the design in your mind, proceed to do it in reality. Instructions on what splitting tool to use and how, you can find in video tutorials on Youtube. Having split the design, you now come to the next part: adding of the alignment stitches.

splitting-in-pe-design-02.png.3a4337aa1b

Splitting a design: adding alignment stitches/crosses 

Some people prefer alignment stitches, some use alignment crosses. Both are utilities allowing you to quickly and within the accuracy of 1 mm join two designs into one project while rehooping. Recommendations on what tools and with what preferences you should use when creating the utilities for making the joining process easier, you can find on Youtube

splitting-in-pe-design-03.png.cccdb8e247

Alignment stitches and crosses are always situated in the hoop intersection area and are present in both first and second parts of a design. In the first part of a design they are embroidered last, and in the second they are embroidered in the beginning. They must match together. If they match loosely, you should rehoop the fabric or change the design position in the hoop. If possible, place you alignment stitches and crosses where there will be no embroidery. If there is no such possibility, delete them after aligning.

Splitting a design: saving 

After having completed the splitting you should save the result into two different files, which will be embroidered one after the other, and choose which one of them will come first. In our example, we embroider the body first and then the head. Is it clear, why? Because if there is a minor offset, Stitch's head won't look like it is incorporated into his body. Before saving your design delete the virtual hoops, because they have completed their task and you won't need them anymore. 

After this lesson you'll have 2 files as a result: Body. PES and Head.PES. Steps in these files go as follows: 

  • Body.PES: First, you embroider all the objects of Stitch's body, then the alignment stitches and crosses. 
  • Head.PES: First, you embroider all the stitches and crosses, and then all the objects of Stitch's head.
Irina

Original text by: Lisa Prass

Every embroidery or sewing and embroidery machine has its maximum embroidery area. The hoops for designs of that size are supplied with the machine. The embroidery process goes like this: you set your hoop and embroider your design from the beginning to the end, not moving the hoop once. Sometimes, the hoop with maximum design area much bigger than specified in the user’s manual also comes with the machine. Such hoops have their own names depending on the brand: jumbo magna hoop, giga hoop, mega hoop. These hoops allow you to embroider designs that exceed the maximum embroidery area. 

Giga hoops for embroidery machines 

All the listed hoops belong either to the multi-position or the rotating hoops. Their primary purpose is to allow the customer to embroider designs exceeding the machine's maximum embroidery area. The embroidery in such hoops is done stage-by-stage, without rehooping the material. 

Multi-position giga hoops 

For embroidery machines with the hoop holder located on the left multi-position hoops are produced. The hoop is located between the holder and the body of the machine, which imposes restrictions on the hoop size. The embroidery area can be increased only lengthwise.

The embroidery usually goes from top to bottom, changing the position of the hoop in the process.

The embroidery process in this hoop goes like this: you set the hoop and embroider one part of your design (marked by the blue dotted line on the photo). Then you change the position of the hoop and embroider the next part (red dotted line), then change the position once more and embroider the last part of your design (green dotted line). There can be from 2 to 4 positions in general. Multi-position hoops are fixed only on one side.

giga-hoops-01.jpg.f7b21791ce99be77aa4bf4

Rotating giga hoops 

Rotating giga hoops are made for embroidery machines with the holder on the right side or at the rear. The embroidery area may be increased both lengthwise and breadthwise, because there is no restriction in the form of the body of the machine. Rotating hoops are fixed in two places (on the right and left). There can be from 2 to 6 positions. The embroidery process goes like this: you set the hoop and do the first part of the design (1). Then the hoop changes its position, and you do the second part of the design (2) After that the hoop rotates, you do the third part of the design (3), then the hoop changes its position, and you do the last part of the design (4).

giga-hoops-02.jpg.5fb0fd115c19b9de6e5a6b

Machine embroidery designs for giga hoops 

Now a bit about designs. The main problem with the beginners is that buying a giga hoop they think they can take any machine embroidery design that fits giga hoop embroidery area and embroider it. But it turns out that the machine cannot recognize the design.

The key to that problem lies in understanding of this fundamental truth: 

Design that are to be embroidered in the giga hoop must either be split into separate files beforehand or be prepared in machine embroidery design software by the embroiderer himself. 

Some manufacturers make machine embroidery designs for giga hoops, which gives users an opportunity to embroider without doing all the preparations in the embroidery design software. These designs are usually marked "for giga hoops" and have a list of recommendations in their supplementary sheet. 

If you downloaded a design that exceeds the maximum embroidery area of your embroidery machine, but fits the giga hoop, you should use the design editor. 

Every embroidery software has its own ways of splitting the design, and every design must be treated individually. But this will be the topic of some other blog. Meanwhile we invite you to discuss the ways of splitting the designs for giga hoops on our forum.

Irina

Original text by: Irina Lisitsa

Embroidery on knitwear requires the use of supplementary machine embroidery materials. You have to embroider a knitwear jacket ASAP, but all the specific stabilizers have run out? You may replace them with a piece of cloth that does not stretch, thin organza for example.

embroidery-on-knitwear-with-organza-01.j

This method is good for designs with loose fillings or made with columns, because organza will preserve the structure and prevent the stitches sinking into the fabric.

Embroidery on knitwear. Materials:

  • Embroidery threads
  • Machine embroidery design
  • The top stabilizer, a water soluble film
  • Your item
  • A piece of organza, big enough for hooping

embroidery-on-knitwear-with-organza-02.j

Embroidery on knitwear. A step by step guide:

Hoop a piece of organza, like you hoop embroidery stabilizers. Spray it with adhesive, then mark the center of your design on an item or fabric.

embroidery-on-knitwear-with-organza-03.j

embroidery-on-knitwear-with-organza-04.j

embroidery-on-knitwear-with-organza-05.j

Stick your item on your organza piece. Add a piece of thin water soluble film on the top so that the embroidery on uneven-surfaced knitwear would come out neat, and the stitches wouldn't sink into the fabric. Set you hoops in your machine. Run the basting stitch first: this will join all the layers together and will hold the fabric in place while embroidering. Run the embroidery.

embroidery-on-knitwear-with-organza-06.j

embroidery-on-knitwear-with-organza-07.j

embroidery-on-knitwear-with-organza-08.j

After the embroidery is completed, remove the basting.

embroidery-on-knitwear-with-organza-09.j

embroidery-on-knitwear-with-organza-10.j

embroidery-on-knitwear-with-organza-11.j

Tear the water soluble film from the right side of the item and carefully remove the organza pieces between the embroidered objects. The work is done.

embroidery-on-knitwear-with-organza-12.j

embroidery-on-knitwear-with-organza-13.j

Your embroidery on knitwear has been completed successfully!

embroidery-on-knitwear-with-organza-14.j

Irina

Original text by: Tania Makarova

This master-class tells a secret of embroidering a machine embroidery design, which must be oriented along the seam. It is important to place a design on the item and stabilize it when positioning along the seam. This master-class will tell you how to do it.

embroidery-along-the-seam-01.jpg.7ca180c

Materials: 

  • An item
  • Machine embroidery design
  • Temporary spray adhesive
  • Tearaway stabilizer (non-adhesive)
  • Underthread
  • Upper thread (metallic)

Embroidering a design along the seam. Preparing for the job: 

1. Hoop the cutaway non-adhesive stabilizer. Load your design into your embroidery machine. Draw a line on your stabilizer, along which your design will be oriented. To determine how to position the fabric, set you hoops in your machine and to the tracing. Mark the stabilizer at the extreme points of the design and spray it with adhesive. Take the hoops from you machine and add a layer of spray adhesive to your stabilizer.

embroidery-along-the-seam-02.jpg.c7bdbf6

embroidery-along-the-seam-03.jpg.94c28af

2. Mark the upper and the lower edges of the future design on the item. Place your item so that the middle of a seam would match the drawn line. If your machine has an option of scanning the fabric, it will help you to quickly position the fabric on the stabilizer; the seam will be shown on display, and you will be able to move the design right or left, if necessary.

embroidery-along-the-seam-04.jpg.6eb3f7d

embroidery-along-the-seam-05.jpg.9858f09

embroidery-along-the-seam-06.jpg.242f344

3. Temporarily stabilize the item with pins. 

In the course of preparing of this master-class I added a basting stitch in the editor. It is used for holding the fabric in place and also to ensure that the middle of a seam coincides with the line drawn on stabilizer. How to add lines to the design, you'll read in our future blogs. 

If you notice that your basting stitch does not coincide with your seam, you should stop sewing and remove the thread. Repeat the positioning of the fabric on stabilizer. You can also do it by hand, arranging the fabric so that the stitching line would go in the middle of the seam. Be careful and try not to put your fingers under the needle!

embroidery-along-the-seam-07.jpg.8107093

embroidery-along-the-seam-08.jpg.6e70f18

embroidery-along-the-seam-09.jpg.926a1c4

4. Run your machine and embroider your design. It's ready now! You just embroidered a design with the seam right in the middle. All you have to do now is to rip off the basting stitch.

embroidery-along-the-seam-10.jpg.f3bd177

embroidery-along-the-seam-11.jpg.0f984dc

You can use this method for embroidering designs, which are positioned at an angle. When embroidering a decorative pocket, I decided to run the stitch line along the contour of the pocket, under the finishing satin stitch. In this case you won't need to remove the basting.

embroidery-along-the-seam-12.jpg.e0802d1

embroidery-along-the-seam-13.jpg.c4c7d48

embroidery-along-the-seam-14.jpg.ab505ca

Irina

Creating a lace edging

Original text by: Lena Craftwork

Sometimes you need to add a nice edging to an item. There are many ways to do it, and we will see one of them here: creating a lace edging. You can decorate a napkin, a handkerchief or any other item with lace. There are numerous FSL machine embroidery designs; choose the one that suits you and matches your item.

lace-edging-01.jpg.fad711d7d3ff208850408

Materials:

  • Water soluble stabilizer
  • Spray adhesive
  • Upper thread
  • Underthread
  • Fabric for your napkin

The process of creating a lace edging goes like this:

1. Hoop the water soluble stabilizer. Load your design into your embroidery machine. Begin embroidering. The first stitch will mark the position of the edge of fabric on stabilizer.

lace-edging-02.jpg.1dfc4f639d930bea6582f

lace-edging-03.jpg.6851f4a21738ad72625b0

lace-edging-04.jpg.faee2fc91cd7c5d334885

2. Add a layer of spray adhesive to your stabilizer. Stick your fabric to the stabilizer according to the outline and repeat the embroidery using the first thread color. This will secure the fabric in place. Then continue your embroidery and do the lace part.

lace-edging-05.jpg.6d8f4a9a47c56888965e5

lace-edging-06.jpg.d7fed4591d636476427fc

lace-edging-07.jpg.d1a7d3962c7a1ad90935d

If you created your design using special software, the embroidery will go along the fabric edge and also at the corner. To decorate other parts of the napkin repeat the same thing joining the lace parts together. Hoop water soluble stabilizer and embroider using your first thread color. Place the second corner of your napkin onto the stabilizer, and secure it there.

lace-edging-08.jpg.1316ea8c01d2b64893a4a

lace-edging-09.jpg.a5173e01f405af063501c

lace-edging-10.jpg.56632bd835e2e18b70ba6

3. Repeat the embroidery along all the remaining edges.

lace-edging-11.jpg.8d23d209c71fcf6c98d34

lace-edging-12.jpg.ad58c9a2834bba3b17432

lace-edging-13.jpg.de3ce4ead1d5d03ba585e

4. Cut the stabilizer near the edge of your embroidery. After the work is completed, wash your napkin with a lace trim in a sufficient amount of warm water.

lace-edging-14.jpg.8214cf1741e5fb5126ff5

lace-edging-15.jpg.76e2a56e4d0fc1a48e05f

lace-edging-16.jpg.748a6021df621aeab0225

The napkin is ready. You can decorate a tablecloth or a handkerchief in this way, too.

lace-edging-17.jpg.9afffbad8a8c12874747f

×