Original text by: Marina Belova
I have once written a guide to all sorts of embroidery stabilizers (fusible interfacing materials) for manual embroidery. As we all know, the market is full of such auxiliary materials, which can be helpful to an embroiderer. Nevertheless, in these days I often think that not all of them are useful for me in my day-to-day work.
In the past I used to buy a lot of stabilizers of various brands, to see if they could be really helpful. I liked some of them
Original text by: Olga Ionova
This master-class will tell you how to do cutwork embroidery. Cutwork embroidery has its own aspects, and if the design is beyond the hoop so that you have to join its parts together, the amount of the aspects doubles. This master-class will tell you how to do cutwork with alignment and border designs without the special hoop, but with the help of alignment stitches instead.
Cutwork embroidery. Materials:
• Fabric or an item to be embroidered
When learning to digitize half the battle is knowing how to use the tools and what tools to use to get a desired look. Whether you have a basic digitizing level or the highest level possible if you do not know how to use the different tools you are no further ahead. In this blog we look at using the basic tools, including the RUN tool, satin tool and fill tool.
I consider these the most simple of design as your only using one tool. When you get a grasp for this
Avoiding pit falls of working with Caps
When dealing with your customers you may need to educate them on what the placement and size of the logo for your particular machine is, as often the customer will want the designs to be too large for the cap frame. Some cap frames can accommodate a 270 degree rotation and some only do 180 degrees, the height will depend on the hat.
Rule 1 , Placement
In some areas of leisure you will find niche markets, I have found one being able to make custom carpets for custom cars and sport fishing boats. So if you live near the water this is something you may want to offer, or if you have any car clubs in your areas. First you need to make a sample and bring it to car shows etc, or display it at your local dealers.
Hi have done mats like the like the item Below, this was actually done for a young kids room.. As it was no
Original text by: unknown
Every embroiderer has been in a situation where an embroidery machine that was running smoothly only a day before, suddenly begins to break the upper or the underthread almost every stitch. Such a problem, in case you eliminate the possibility of mechanical breakage, is connected with certain processes, and also with the quality of the embroidery materials you use in your work. If such a situation occurs, try to solve the problem yourself before calling a service e
Original text by: Katya Ebber
Your hoop is not one-size-fits-all. You become acutely aware of it when you need to embroider lace ribbons or edgings. This master-class will tell you how to align machine embroidery designs with lace so that the joining places could not be seen. This master-class shows working in the embroidery design software (creation of the alignment crosses), and also the embroidery process.
Preparing the design in Embird
Load a chosen machine embroidery design
Master-class by: Irina Lisitsa
Beginner owners of embroidery machines are at a loss when overlooking the vast majority of stabilizers. This series of master-classes will teach you the basic rules of hooping of various types of stabilizers. After having read this you will be able to hoop an adhesive stabilizer (Filmoplast) in the right way. This type of stabilizer allows you to secure fabric with a layer of adhesive. Works good for fabrics of high and medium density, and also fabrics that ca
Embroidery Digitizing is a method to decorate the overall look of the design or material. The methodology starts when the art-piece is turned into a digital format and then the compatible software works on it to enhance the visibility and corporate image. After that, the design is read by the embroidery machine, turned into the graphic format and in the end; the machine embroiders the artwork efficiently. The techniques and methods take whole lot of efforts and expertise to get the job properly
Free embroidery software download here My Editor
Question: For some reason this will not completely install and I've tried several times. I'm using windows 10 with 4 core processor and 8 GB of ram and over 400 GB of free space. I have No issues downloading other programs so it must be some sort of problem with the program I believe. I hope someone else can confirm this.
Support answer: Please try the following: 1. Clean up all temp folders. In an explorer’s address bar type %te
Stitch Types & Limitations
When your learning to digitize it is very important that you understand what the different stitch types and when they should be used. Depending on your level it will depend on what tools you have.
There are three main categories of stitches in your embroidery digitizing software these stitch types can take form in many different ways.
The three stitch types includes the run style stitch, satin style stitch and the fill style stitch. L
Hi all! Hoping for help. I’m doing a cap. Six letters offset to the left side on the cap. The beginning of the word is 1/8” lower than the last letter. It’s sewing uphill. How do I get the last letter flush with the first?
I found these designs and did them for a friend who is a serious cat lover, 7 at the last count and actually has a ring in ginger. I did these for gifts and she loves them and already is pdeciding which ones match her babies.
I didn;t have time to iron them before I took photos. When I ironed them they looked awesome.
Thanks for the designs.
Original text by: Lena Craftwork
Sometimes you need to add a nice edging to an item. There are many ways to do it, and we will see one of them here: creating a lace edging. You can decorate a napkin, a handkerchief or any other item with lace. There are numerous FSL machine embroidery designs; choose the one that suits you and matches your item.
Water soluble stabilizer
Fabric for your napkin
When learning to digitize you need a good understanding of some of the basic tools including the select tool, understanding the beads and how to use them. Will help you when working with text to match a embroidery design.
Text Tool bar and Digitizing
When digitizing embroidery designs its very important to understand the different text tools and how to manipulate them , in
Are you new to the industry do you out source your embroidery digitizing, How do you know which digitizers are good? Well this can be a challenge at the best of times, whether you learn to digitize or out source it you will still be a part of the equation. You need to provide them with the tools to make the machine embroidery design custom to your needs. You need to provide them with the size, number of colors, the fabric or application you plan to embroider it on and
In the embroidery industry whether you are new or be in the industry for a while. You will be asked to make some embroidery design that might make you wonder how to do that. 3D Puff embroidery design is one topic that I find I get asked about all the time. How do I make my designs stick off the hat .. Well its actually not that difficult, and you only need some basic tools, including the run tool, satin tool and possibly the fill tool.
If you need to just
NOTE: This chapter will be covering some advanced options for Maestro users, however to the full benefit of this chapter you will the Boring tool, cording tool, for your machine. This tool can be used for decorative stitching, by placing holes in the garment and embroidering around them. You will need to check with your Distributor if your embroidery machine supports the hardware and get the option in you
In Tajima DGML by Pulse there is an option which also come standard to allow you to make a stitch called a fur stitch. However I like the manual way which is available in many other levels. I will illustrate both in this document.
Why should you use a fur stitch ? Well a fur stitch can be used as a layer to add depth to a embroidery design, here are a few examples where the embroidery design has a fur stitch as the base layer
In the embroidery industry we often encounter issues with specialty embroidery threads, and or applications these sometimes require special threads, backing, and needles.
When working with Metallic threads you will notice that they have fibers wrapped around a core, which may be nylon, polyester, or rayon. This can cause issues when using standard needles and you may need to look at the following tips. below.
1. Use needle with a large eye
Making Custom Thread Charts
In Tajima DG/ML by Pulse there is a number of pre-installed thread charts however there are times where you need to create a custom chart with different thread thickness and or colors
Thread Charts and Thread Palettes
Embroidery Thread charts are a collection of embroidery thread and color information. Tajima DG/ML by Pulse has thread charts ins
Original text by: Irina Lisitsa
Embroidery on knitwear requires the use of supplementary machine embroidery materials. You have to embroider a knitwear jacket ASAP, but all the specific stabilizers have run out? You may replace them with a piece of cloth that does not stretch, thin organza for example.
This method is good for designs with loose fillings or made with columns, because organza will preserve the structure and prevent the stitches sinking into the fabric.
Original text by: unknown
Everything has its reason, and it is good when these reasons can be analyzed and understood and mistakes prevented before the material has been hooped and stabilizers, fabrics, threads and, what's most important, time have been wasted.
Are you familiar with the situation when you overexert yourself, but all you get is an ill-looking embroidery with objects dislocated and the fabric pulled? How to prevent it?
On the quality of machine embroidery
Original text by: Irina Lisitsa
To demonstrate the process of making an openwork embroidery I chose two-thread french terry, because this type of knitwear is stable, trimming distorts it very little, and therefore, is perfect for this machine embroidery technique. You can do this on any sewing or embroidery equipment. The making process is the same as with openwork and cutwork embroidery on any other fabric. This master-class will help the beginners to understand that machine embroidery on