Jump to content

Three D of machine embroidery digitizing


diver361

434 views

In digitizing designs its important to understand the machine embroidery design characteristics, this helps if you have taken some time of art courses as it can prepare you to look at the design different. It also depends on the size, and quality of artwork you have to work with. In this blog we are going to look at the three "D" of digitizing, Depth Density and Dynamics. Whether a design comes from a line drawing, clipart or a photograph, you need to understand how to get the software to be able to recreate the density, depth and dynamics of the design. This is not an easy task as you really need to know some settings in your software. Lets take a look at a design and how it was made.

Original image and design information

Original image file
This deer embroidery design has depth with the trees fence and grass all in the back ground. it has various densities to create the illusion of blends, and the dynamic of texturs.
We will take you through each layer of the design and show you how they made this design.

Stitch count 41192
Design trims 44
Color changes 14 colors
height 5.99 in design width 4.60 in
Note: 14 of the 44 trims are from a color change, so technically there are only 30 trims in the whole design.. So you need to break it down and separate sections to get the design proportions correct.

Layer 1 background

Background of the embroidery design

Digitized embroidery design

Because this is a background layer the density of the design is a bit less than it would be if it was on top of another color. ( 36.3 spi using a random fill pattern.

Layers with embroidered areas

Notice that the selections are all connected so there are no trims in this section this speeds up the sewout and reduces the amount of simulated thread breaks. 

Layer 2 high light of trees

Layer 2 embroidery design

Note: The fence post sits over will make the design over top of this, this detail stand out and be correct to the image.

Only one layer of deer embroidery design

The detail or dynamic of this layer is to add some detail to the trees, this needs to be behind the deer. To ge the blending effect you should use a fill, Random pattern density of 30 to 38 spi and it should all be connected by run stitches.

Layer 3 detail of trees

3 layer embroidery design

This layer will give you a dynamic look and feel to the background as it will have some texture to it, it also covers up and blends the background of the first layer.

Only 3-th layer embroidery design

Layer 4 and 5  grass and fence

Embroidery design layer 4

This layer goes slightly over top of parts of the back ground but slightly behind the deer. To ge the blend effect
you need to layer a few density of the complex fill is between 35-44 spi using a random pattern.

Layer 5 detail of grass and poles.

Embroidery design layer 5 grass and poles

This layer is composed of satin and run stitches to simulate the detail, the shade is slightly different than the grass aboe.

Layer 6  chest background

Embroidery design layer 6

The fence wires need to go over the grass so they do not disappear in the stitches.

Fence wire embroidery layers

This is the background layer of the deer body its a std complex fill density of 63.5 with a random fill pattern.

deer background embroidery layers

Layer 7 and 8 depth and dynamic of the chest.

Embroidery design layer 7

Layer 7

This layer is made up of light fills, and a run stitches playing with the density and random pattern. no trims in the design.

Embroidery design layer 7 light fill

Embroidery design layer 7 light fill

Layer 8

This layer has a complex fill at 50 spi and in the middle a run stitch to add detail to the previous fill.

Layer with middle run stitches

Layer 9  and 10 chest highlights and antlers

Embroidery design layer 9 10

Layer 9

This layer adds some contrast and depth to fills giving it some blending effect.

Embroidery design layer 9 antles

The antlers sit on top of the back ground making them stand out, they are made using a satin stitch with a density of 52 spi. Not to scale. The fill is made using the random pattern, with a density of 50 spi no its all connected by travelling stitches.

Embroidery design layer 10 traveling stitches

Layer 11 high light of antlers.

Embroidery design layer 11

The white layer is made up of satin and run stitches the satin density layers the grey shown last image, creating detail , density is 31 spi.

layer with created details

Layer 12  detail of antlers.

Embroidery design layer 12

This layer is made up of runs and satin stitches and some stitches and the density varies and stitch type also e-stitch was used as a pattern to create an effect. 

Embroidery design layer create effect

Layer 13 high lights in deer head

Embroidery design layer 12

This last layer ads the final detail of the eyes and nose and hears to high light portiosn.

layer with nose and hears details

Comparison from the original image to the sew out of the design. 
The image on the left is the original image supplied and on the right the sew out.

Image finished embroidery design

  • Like 1

1 Comment


Recommended Comments

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...