Jump to content
  • entries
  • comments
  • views

Contributors to this blog

EOD 11 tip; Changing Density from the Option ribbon

You can change a section's embroidery density from the application's option ribbon.

Follow these steps:

1. Select the section to which you are going to change the density.

Click on the “Select Object” tool and on the section of your interest.

Tool “Select Objectblogentry-6-0-58347600-1411828287.png


2. On the corresponding ribbon, insert the new density value in the “Density (lines/mm)” cell, and press “Enter”.

In the example we changed the density value from 4 to a new value of 6.


3.The section will change the density to the new value inserted. By taking the density value from 4 to 6 you will notice a bigger number of embroidery stitches in the section.



Recommended Comments

There are no comments to display.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...