Jump to content

Beautiful design, Morning owl look amazing.

This embroidery work up perfectly and stitch out nicely. 
Buy Now

Excellent stitches and original style

Stitched out beautifully! Looked amazing and no issues!
Buy Now

Loving birds.. Wonderful designs, stitched out beautifully

Really cute, You love this when you stitched it. Would love more of same designs.
Buy Now

Our designs looks great

Stitched out beautifully! Wonderful decoration!
Buy Now

Adorable design. Stitches out beautifully.

"Thanks so much for this design It's lovely and stitched out beautifully on leather."
Buy Now

Leaderboard


Popular Content

Showing content with the highest reputation since 10/17/2019 in all areas

  1. 5 points

    Version Any popular formats

    480 downloads

    For decorating towels and napkins for the New Year. Mouse symbol of 2020. You can embroider on a T-shirt. Size: 7.44 x 3.26" Author: Kotenok Dobriy
  2. 3 points
    My embroidery machine doesn’t recognize a design. What am I to do? Olga approached the embroidery machine. In her hand, there was a brand new 32 Gb USB flash drive that she had bought online specifically for the purpose. Olga drew her breath. She was about to initiate her very first contact with the embroidery machine. Olga stretched her arm in the direction of the USB port on a side panel. The data transfer was about to commence! Her swift stylus was flying over the screen, guiding her to the location, which, according to the manual, contained her embroidery designs. These operations were familiar to Olga: after all, she didn’t play Solitaire on her phone during the long winter evenings for nothing. In the end, she was in for a disappointment: the machine found no designs on the USB flash drive. Olga was quite puzzled: what happened to her files and why the machine did not see them? The embroidery machine doesn’t recognize a design This article deals with the problems almost every machine embroidery novice encounters sooner or later. Gradually, old problems are solved and give way to the new ones; therefore, the information accumulated here will be updated. Before loading the designs into your embroidery machine, carefully read the manual to learn how this can be done. Presently, the most popular way of doing that is using a USB flash drive. For this very reason, it is the USB Flash drive that is most troublesome for novice embroiderers. In this article, I’ll describe the main reasons for the design load failure, together with the possible solutions. The stitch file format is unfamiliar for your embroidery machine The embroidery machine manual always lists all compatible file formats/types. The format/extension is identified by the three letters after the dot in the name of the file. Every manufacturer has its own format to add to the embroiderer’s troubles. Brother — PES Janome — JEF Bernina — ART Pfaff — VIP And so on. If you saved your design in the PES format, and your machine can only read JEF and DST, do not expect miracles. Your machine won’t be able to see the design. Today, DST is considered a universal stitch format. A lot of manufacturers are aware of the fact, their equipment supporting both DST and the format that is its “native”. If your machine can read DST — use it! USB flash drive is full You have crammed too much information into your USB flash drive. This problem does not occur frequently, but it might, especially if you own a machine of one of the previous generations. Try to format the USB flash drive and then load the designs. If the solution has worked, congratulations! If not, read on. You’re using a file format of the newer version I've mentioned the file formats/types just above. You already know that your machine supports PES files, but the machine still fails to recognize them. One possible explanation is that you’re using a newer version of PES than the ones supported by your machine (there are approximately 10 versions of it in total). This trouble usually bothers the owners of the machines that support PES format. What can be done in this case? Open the file in any converter software and save it in the older version of the format. Embird automatically saves the files in the latest version of the format, it being compatible with the majority of Brother embroidery machines. Machine embroidery design was saved to a wrong folder Again, I suggest perusing your embroidery machine manual. It describes the correct sequence, in which the designs should be saved to the USB flash drive, and how to prepare it for the task. Before starting to load any designs, you should format it. Switch on your embroidery machine and insert your USB flash drive into the port. The machine will find and format it, if necessary, creating the system folders. It is in one of these folders that the files should be loaded. In case your machine was made after 2014, you’ll most probably never have to face this problem, as the loading process has since been simplified. On the other hand, anything can happen. The design is too big Any embroidery machine has a maximum embroidery area. It determines the largest size of the design that can be loaded into this particular piece of equipment. If you try to load a 141x139 mm design into the machine that only handles the ones up to 140x140 mm, it won’t be recognized. Open the design in any converter/embroidery editor and check the size. If the design is too large, resize it without stitch recount so as to preserve the decorative fills. P.S. Do not mistake the Giga hoop size with the maximum embroidery area! Embroidery design is not centered Some embroidery formats contain information about the positioning of the design along the X and Y axes. They convey this information to the embroidery machine, and, in case the design is off-center, the machine will fail to recognize it. This problem can be solved by using more complex converters or software specifically designed for the loading of the designs into the embroidery machine. As a rule, they center the designs automatically. P.S. This trouble is common for Janome embroidery machines, with their native JEF format. The ultimate fix is provided by Customizer or Embird. Convert the design, ticking the Center in the Hoop box. You forgot to load the design to the USB Flash drive Yep, it happens. Insert your USB flash drive in the port on your laptop or PC and check. Stitch count is too large This problem usually occurs on the old machines with small hoops, when one is trying to embroider PhotoStitch designs on them. It means the embroidery file contains more stitches that the machine can process. Solution: divide the file by color into two parts. USB flash drive is not compatible with the machine A home embroidery machine is a whimsical lady: sometimes the size is all wrong, sometimes it is the face (or, rather, the manufacturer) she takes an immediate dislike to. If nothing of the above has helped, get a new USB flash drive. Which one to choose? I won’t recommend any particular brands. In my experience, two machines of the same manufacturer and of the identical version treated the same USB flash drive differently: one easily recognized all files, the other refused to do it until they were saved in the special design loading software. Furthermore, the machine behaved in a strange way, stitching like there’s no tomorrow, once the USB flash drive was inserted. So, seek your own USB Flash drive, and ye shall find. Choose the smaller one. The smaller, the better. If you have any questions or suggestions, please feel free to write us a commentary or start a topic in the community. May only the easy-to-read formats and universally accepted USB flash drives come your way! Original text by Lisa Prass
  3. 3 points

    Version Any popular formats

    763 downloads

    A wonderful decor element for a kitchen napkin or towel. Bright and unusual color scheme. An excellent choice for decorating a tablecloth. Size: 5.1 x 6.91" Author: EmbGallery
  4. 3 points

    Version Any popular formats

    338 downloads

    The original light design to decorate a summer T-shirt or a blouse. A great decoration in addition to other floral motifs. Embroidery makes ordinary things stylish. Can be used for dish towel. Size: 4.55 x 3.11" Author: EmbGallery
  5. 3 points

    Version formats: dst. exp,.hus,

    1,781 downloads

    Size: 5.39 x 9.43'
  6. 2 points
    How to use a Ruffler foot Today, we’ll be working with a presser foot designed for the creation of the pleats, frills and ruffles. A little while ago I promised to show you what the Ruffler foot is capable of. At the first glance, the contraption seems a bit complicated. Several adjusters and guides allow you to gather fabric and simultaneously attach ruffles to the garment. Let’s see how it works. The Ruffler foot structure: A bifurcated arm (4) serves to synchronize the attachment with the needle bar. The clamp (5) is for quick attachment of the foot to the machine. Two screws and the adapter at the rear enable the foot to move up and down, and to the left and to the right of the needle bar. Adjusters: The depth screw (1) determines the amount of fabric pushed into the foot every time it tucks: from 1 to 8 mm. With the ruffle regulator (2), you determine how often a ruffle will appear: every 1, 6 or 12 stitches. Once set it to *, the attachment will create no ruffles at all. Fabric guide lines: Green line — for the main fabric, no ruffles. Red line — the ruffling blade. Lilac line — the fabric feed plate (also for braids, ribbons). You may place your fabric along any of the three guide lines, but only using the red one will give you ruffles. Stitch at a low or medium speed! Types of ruffles and pleats: Single or double pleat. To create one or the other, place one (or two, in the latter case) pieces of fabric to be ruffled, along the red guide line. Set the depth screw at 4 or higher. Set the Ruffle regulator to 6 or 12. How to ruffle fabric and attach it to the main fabric simultaneously Set the regulators to make single or double pleats. Insert the main fabric into the guide along the green guide line. You can create a twisted pleat, using a capronic or a satin band, or a specially prepared piece of fabric up to 7 cm wide. Set the stitch length at 2.5 mm. Set the depth screw at 1–3, and the ruffle regulator at 1. It’s also possible to ruffle fabric and simultaneously attach it to two flat fabrics, on the top and bottom. In order to do this, insert the main fabric with its right side facing up, into the foot along the green guide line, and the fabric to be pleated along the red line, with its right side also facing up. Along the lilac line, place the second piece of fabric, with its wrong side facing up. Use the prongs on the foot for the width of the seam allowance to be consistent. How to attach a pleat, folded in half, to the hem of the garment Finish your seam allowance with an overlocker. Mark the width of the seam allowance on the right side with a fabric marker. Place the main fabric along the green guide line, and the fabric to be ruffled along the red one. Adjust the regulators. Stitch to create the ruffles. Press down seam allowance to the wrong side and stitch along the edge. Joining the satin ribbon to the pleat Place the main fabric along the green guide line, and the fabric to be ruffled along the red one. Insert a narrow (up to 5 mm) satin ribbon into the foot, using the prong. Stitch. These are just the highlights of what the Ruffler is capable of. Play around with it, creating your own variants. Original text by Yelena Kraftwork
  7. 2 points
  8. 2 points
    PFAFF Creative 1.5. I am satisfied with my machine very much and found with it common language. )))
  9. 2 points

    Version any popuar formats

    699 downloads

    Good spring motif for decorating a bath towel. Fresh colors. For lovers of floral decoration. Size: 135 x 153" Author: Olla
  10. 2 points
  11. 2 points

    Version Any popular formats

    205 downloads

    Cross stitch is a traditionally popular type of needlework. Modern technology encourages you to do this quickly and efficiently. Embroidered flowers are a good choice for a towel or napkin. Size: 4.18 x 6.45" Author: EmbGallery
  12. 2 points

    Version Any popular formats

    447 downloads

    A small flower for decorating napkins. Bright colors will make it the original element of the kitchen or living room. Suitable for any embroidery machine. Perhaps a slight increase in the size of the design, but not more than 15-20%. Size: 2.66 x 3.1' Author: EmbGallery
  13. 2 points
    How does she work The fabric is stretched and firmly fixed in the hoop. The carriage mechanism moves the hoop along two axes. The computer integrated in the machine controls the movement of the carriage and the needle punctures in accordance with the program - “Machine Embroidery Design”. The embroidery process on the machine usually looks like this: First, the embroidery design file is transferred to the machine. The machine offers to set a hoop of the appropriate size and thread the thread of the desired color. Before embroidering, you can move or rotate the design to the desired position within the hoop. After pressing the “start” button, it remains only to observe how an embroidered pattern is formed on the fabric. If the design is multi-color, the machine embroiders the first color, stops and offers to change the color of the thread. At this point, you can trim the extra broaches of the threads, and there are machines that themselves cut such broaches and do not need to worry about it. After the embroidery is completed, you can remove the hoop and smooth the finished work. The process of embroidering a lion on the leather. An original project with a stylish design. This embroidery design available in our Embroideres store. Unreal lion machine embroidery design also available in alternative Unreal lion embroidery design
  14. 2 points
  15. 2 points

    Version dst, exp, hus, jef, pes, vp3

    1,422 downloads

    No Christmas decoration can do without snowflakes. These simple elements, often made in one color, can give any pillow, napkin or sweater a festive and romantic Christmas mood. The symbol of winter. Add it to your new bath towels that can be a great gift. Size: 2.11 x 1.83"
  16. 1 point

    Version 1.0.0

    516 downloads

    Tom stitches out to 4X6(9/16) inches and has 21,605 stitches. This is a high stitch density file using three colors, but five thread color changes.
  17. 1 point
    View File Pocket with flower free embroidery design Decoration for baby clothes. A cute and simple decor element for a jacket or dress. Size: 3.15 x 311" Author; EmbGallery Submitter diver361 Submitted 11/12/2019 Category Decoration  
  18. 1 point
    This beautiful and useful biscornu Biscornu is a French word, meaning something like “quirky”. You can see these cute thingies in almost every home. Even those who only sew on a button or two from time to time, keep them within reach as something to stick superfluous pins and needles in. A skillfully crafted biscornu may serve as an admirable decoration. But that’s all prattle. My point is this: almost all DIY biscornu tutorials concentrate on pincushions for cross-stitch embroidery done by hand, and practically nobody ever mentions the possibility of doing all the sewing and embroidery on a machine. As I already said, the work “biscornu” is of a French origin. It literally means “something uneven”, “with horns or projections”, “irregular”, “funny”, absurd”. For the embroiderers, this word denotes a small polygonal cushion, more or less symmetrical. This skewed little thing may serve as a pincushion, a pendant, a keychain, a scissors fob, and even an ornament. If you add some suitable adornment, you can even hang it on a Christmas tree! Many people would be happy to receive one as a present. Let’s create a biscornu. In this article, I’ll tell you how I made my own. To make a biscornu, you’ll need: 1. A piece of evenly woven fabric (linen or dense cotton). 2. An embroidery machine. 3. Embroidery threads. 4. Optionally, buttons, beads or seed beads, sequins, and rhinestones. 5. Water-soluble or tearaway stabilizer. 6. A design (you may get one from our store https://embroideres.com/). 1. Let’s start by hooping stabilizer and fabric. Tighten the screw and additionally secure the fabric with pins, so that it doesn’t shift during the embroidery. 2. Load the design into the embroidery machine, attach the hoop and embroider both parts of your biscornu. 3. Attention! The essential part of biscornu decor is backstitch running along the edge of the design. It will be used for the joining of the two parts. 4. Both parts of our biscornu are ready. Cut them out with a 1 cm seam allowance. 5. Before you start assembling the thing, locate the centers of every side of your squares. Mark center points with pins. Join the center of one square with the corner of another. This will give the thing the required skewed shape. The assembling process is fun, but it’s also time-consuming, so switch on an audiobook or an episode of your favorite TV series. We’re going to sew the parts of our biscornu by hand. 6. Pick up the needle and the thread (same as you used for the backstitch), fold it in half so that there is a loop at one end. Move the needle through the first backstitch, then back and through the loop, thus securing the thread with an invisible stitch. 7. Pull the thread through 2 corner stitches. 8. Continue in this manner, joining the stitches of square No1 with the stitches of square No2, until your biscornu is stitched up on three sides. You only sew half of the fourth side, leaving an opening for the stuffing. 9. Snip the inner corners. 10. Stuff the things with bits of polyester batting or another padding material. 11. Sew the opening. 12. Your biscornu is almost ready. Let’s add some finishing touches. 13. Fold the thread in half, so there is a loop at one end, and thread the two ends through the needle. Find the center of every side of the square, and with a long needle pierce the biscornu through. Then bring the needle back and through the loop. 14. Pull the thread through the buttons, gathering your biscornu a bit. Having looked at my biscornu the following morning, I realized that I didn’t like the buttons. So I replaced them with beads. Good luck and easy stitching to you all! Creating biscornu is fun! Tutorial supplement. How to create a design for a biscornu Loading the design 1. Open Embird Editor and click on Cross Stitch. 2. Load the design via Chart Import. 3. In the window, click on the part of the design and use the Crop tool on it. You should get something like this. Press OK. While cropping the image and placement of the marks, use +/- to zoom in or out. 4. In the next window, place the red marks as shown in the picture below, and click on Align Grid. In the window that pops up, you’ll be offered to place a number of crosses between marks 1 and 2, and also between marks 2 and 3. Type in 10 (the number corresponds with the real number of crosses between the marks) and press OK. 5. See whether the red greed aligns with the chart greed. If yes, press OK. If the two grids don't align, click on Undo Alignment and change the placement of the three marks. A 100% alignment is not necessary. The loading image FAQ How to activate the Crop button? Open your image (step 3), and immediately after that place the cursor in the spot A. Holding down your left mouse button, move the cursor to the spot B. Release the button. Now the Crop tool is active. Why did you place the red marks in those places, and not in the corners? Why 10 crosses? You can place the red marks whenever you want them, and set any spacing you like (even if it is only 1 cross). Play around with the options and see what works best for you. Drawing the pattern 1. First of all, let’s choose the color. Click on the Eye Dropper tool on the toolbar. Left-click on the wine-red color. It will appear in your color chart. 2. Click on Line and create the objects 1, 2 and 3. 3. Now, click on Pencil, and create the objects 4, 5 and 6. Play with these tools a bit. Note the difference between them. Decide for yourself, in which cases you would prefer Line, and when Pencil would be better. 4. Click on the Eye dropper again, but this time choose grey. 5. Now click on Line and draw the objects 1,2 and 3. 6. Click on Pencil and draw the rest of the objects. We’re done with drawing. Let’s proceed to the last part, copying and pasting. Copying and placement Before copying and placing the symmetrical pattern, you’ll need to change the size of your work area. 1. Go to the Options menu and click on Preferences. 2. Check the Keep Aspect Ratio box and change the value to: 3. Your work area now looks like this: 4. Click on Marquee (vertical toolbar) and select your pattern. Press Auto Repeat. 5. In the opening window, set the following values: right pointing arrow (1), mirror horizontally (2), spacing -1 (3). Press OK. 6. Using the Marquee tool (step 4), select the pattern and click on Auto Repeat. 7. The window will pop up, where you set the following values: The arrow pointing down (1), mirror vertically (2), spacing -1 (3). Your pattern is ready. Save the file in the necessary format. For those who don’t want to bother with all that, here you can download the design. Original text by Irina Lisitsa, tutorial supplement by Lisa Prass
  19. 1 point
    Thank you! My machine doesn't recognize file if I copy file without opening it.
  20. 1 point

    Version Any formats: dst, exp, p

    2,444 downloads

    Size: 5.06 x 5.89'
  21. 1 point

    Version Any formats: dst, exp, p

    6,032 downloads

    Stylish and simple design. A beautiful solution for cushions made of coarse cotton or lightweight women's blouse. You are unlikely to find a second similar design. Decorating home decor items with our designs is not a complicated process. Recommendations on the choice of materials: Dense detachable or detachable stabilizer - 80-100 grams per m2. If you embroider on a summer T-shirt, use 2 layers. Thick upholstery fabric if you will use the project to create pillows. Size: 7.09 x 8.74'
  22. 1 point
  23. 1 point
    Bindweed free embroidery design View File Cross stitch is a traditionally popular type of needlework. Modern technology encourages you to do this quickly and efficiently. Embroidered flowers are a good choice for a towel or napkin. Size: 4.18 x 6.45" Author: EmbGallery Submitter diver361 Submitted 11/04/2019 Category Cross stitch  
  24. 1 point

    Version : dst, exp, hus, jef, pes, vp3

    14,031 downloads

    If you decide to make an unusual decoration of the Christmas table, this project is for you. Santa's face can be the basis for creating original napkins. Your fantasy can work wonders with this creative project. Any shapes, fabrics and thread colors. Your guests will be delighted. Size: 4.26 x 4.28'
  25. 1 point
    Sewing essentials: Double stitched seam Double stitched seam is one of the basic seams that are used for sewing shirts, swing blouses, jeans, sport trousers, bed linen, etc. If you only have a sewing machine and no overlocker, no need to worry about it. Thanks to the double stitched seam, both right and wrong sides of your garment will look perfect. Ready? Let's go! Before you start working on the actual garment, find some leftover pieces of fabric and do some tests. In this tutorial, I’ll be using a piece of middle-weight fabric, but keep in mind that double seam is also suitable for delicate fraying fabrics as cheesecloth and batiste. I strongly advise against using it on highly stretchable knits, unless you’re an owner of a coverstitch machine with adjustable differential feed. Creating double stitched seam Far left needle position Standard Brother sewing machine presser foot Pink upper thread and turquoise lower thread Blue-colored wavy line on the right side of the fabric Put the fabric pieces with their wrong sides together. Stitch at a distance of 0.5 cm from the edge. To get a nice straight row of stitches, use the scale on your standard presser foot. Keep the width steady by using a seam guide on your throat plate. In the photo, you can see the two details stitched together from the wrong side. Press the seam allowance with an iron. Put the details with their wrong sides together, circumventing the protruding seam allowance. Stitch at a distance of 0.7 cm from the edge. You can choose a different value if you want. Play with the stitch width, do several test pieces and decide which one works best in your case. For the purposes of this tutorial, I set the values as follows: ready double stitch width 0.7 cm, seam allowance 1 cm (0.3 cm will be “lost” in turndowns). As a result, the wrong side of your garment will look like the one in the photo below. The edge of the fabric is hidden inside the seam allowance. After that, not a single loose thread will escape. Press the seam allowance with an iron. Right (the photo above) and wrong sides (the photo below). > Now all that’s left is to add a finish. It’ll kill two birds with one stone: secure the seam allowance on the wrong side and serve as a decoration. You may add one or two lines of decorative stitches. If you chose the latter of the two options, place the fabric under the foot and stitch the first line of decorative stitches at a distance of 0.25 cm from the joining stitchline. For the sake of convenience, you may draw a line with an erasable pen on the foot itself (see the photo). Or, you may skip this and proceed to the second line of decorative stitches. It will be just as durable, but on the right side, there will be less decoration. The second line of decorative stitches should lie at a distance of 0.7 cm from the joining stitchline. Use the scale on your presser foot while doing that. All done! You now have two parallel lines of stitches on the right side, and three on the wrong side. Original text by Irina Lisitsa
  26. 1 point

    Version dst, exp, hus, jef, pes, vp3

    1,775 downloads

    Looking for embroidery for the upcoming winter holidays? A beautiful decoration for a Christmas pillow or a bag for a gift. One color of thread. You can use different colors to make a series of one-piece items. Size: 4.74 x 6.08
  27. 1 point

    Version Any formats: dst, exp, p

    1,302 downloads

    Size: 4.87 x 5.58'
  28. 1 point

    Version formats: dst. exp,.hus,

    3,255 downloads

    Size: 2.83 x 3.83'
  29. 1 point
    I love the Autobot Coffee embroidery design. Any chance you can make a Decepticon coffee embroidery patch as well?
  30. 1 point
    Please have a look at our machine embroidery design development service. It is fast and high quality. Custom digitizing order page.
  31. 1 point

    Version Available formats: dst.

    2,163 downloads

    Size: 4.90 x 4.77'
  32. 1 point
    Look at this picture: you see just finished work on cool cover for tablet PC or small book. Sewing machine is still on table and there are many thread and other things around. But author is very proud of her work piece. This is really cool thing decorated with Compass dreamcatcher embroidery design. It is original one colored picture that reminds compass. Author: Leather idea
  33. 1 point
    This is pretty little towel made of soft and comfortable terry fabric. It is prepared as nice gift for little child who loves to take shower and bathroom. Now it will be even more pleasant due to this wonderful bath accessory. It will be definitely loved by child because of picture chosen for its decoration. It is Teddy Bear Christmas is coming embroidery design.
  34. 1 point

    Version Any popular formats

    416 downloads

    Free Standing Lace. An unusually beautiful project for decorating a room for birth. You will be able to impress your friends and family members with your creative abilities. For all types of embroidery machines. Size: 3' x 3.91" Author Valery.
  35. 1 point

    Version 1.0.0

    430 downloads

    Donkey stitches out to 3(3/4)X3(1/16) inches and 16,273 stitches with 8 colors.
  36. 1 point
    Wow. Das ist wirklich eine aufwändige Technik, die sich aber lohnt. Würde das auch mit einer kleinen stickmaschine gehen, oder nur mit so einem Profigerät?....Vielen Dank und liebe Grüße, Antje
  37. 1 point
    This is decorative textile carpet decorated with original embroidery sample. Design is available here: Polar owl in glasses embroidery design. It is figure of strict forest owl wearing bright accessories. This picture looks very interesting due to realistic manner of image and laconic color scheme. You can add it with thematic inscription as author of this cool work piece did.
  38. 1 point
    There is billet ready to be used for decoration of different things for baby. You can take it to embellish baby cot’s linen, clothing or any other textile accessories. Small cute birds cross stitch free embroidery design is amazing scene of nature’s everyday life. There are many little birds sitting together on tree’s branch and talking about their affairs. Author: Linda Andrade
  39. 1 point
    You can search for pattern in our large Dog embroidery designs library. An alternative option we can make this design especially for you.
  40. 1 point
    You have already started the preparations for the New Year holidays? Now is the time! We have already prepared new designs with a Christmas theme for you. Buy this design Christmas owls embroidery design 5
  41. 1 point
    There is the funny potholder which can be a good gift for New Year or Christmas. Smiling face of Santa Claus looking at you under the hot mug can lift anybody's mood. is made for creation a separate textile work piece with the processed edge. You also should choose the suitable fabric for this embroidery because the background is very important here: the white color of fabric is ok.
  42. 1 point
    Oh, I'm glad I found the right English word ) It took some time )
  43. 1 point
    Many thanks for wonderful design.
  44. 1 point
  45. 1 point

    Version Any formats: dst, exp, p

    969 downloads

    Snowflakes are an ideal and simple way to give any thing a festive New Year's look. This embroidered free snowflake will add magic and celebration to a small kitchen towel. In your small cafe, a napkin with machine embroidery will remind guests of the upcoming Christmas holiday. Lekgo and fast. Any craftsman can handle it. Do not need experience. Size: 2.91 x 2.91'
  46. 1 point
    This is nice textile bah made from rough natural fabric. Due to its special form it can be used as pack for original gifts – such as bottle of wine or coffee package. Bag decorated with Gnomes celebrate Valentine's Day too embroidery design can be used both for Christmas and New Year gifts and also for Valentine’s day gifts. So you can make this work piece not being afraid that it will be unclaimed.
  47. 1 point
  48. 1 point

    Version dst, exp, hus, jef, pes, vp3

    714 downloads

    Size:
  49. 1 point

    Version Any formats: dst, exp, p

    1,302 downloads

    Size: 7.36 x 5.50'
  50. 1 point

    Version Any formats: dst, exp, p

    1,432 downloads

    Size: 5.62 x 3.37' We would like to thank you for choosing OUR embroidery designs for your next project. When you are using our designs in your embroidery or garment embellishment please share your ideas, techniques, projects and photos of your final product with us. You can publish these photos in your personal album on our page here (insert a link on how to set up a personal album) or in the Support page here (insert a link to where they can publish the photos) if you don’t have one as yet. It is fascinating for other novice users of embroidery to see what is possible to achieve with different embroidery designs and most importantly publishing photos and projects will earn YOU one free bonus design for EACH successfully published photo!
×
×
  • Create New...