Search the Community

With help embroidery you can easily update your wardrobe. On our site you will find embroidery designs for every taste. Find this design Leopard free machine embroidery design If you decide to embroider this design with a knit T-shirt or T-shirt, you will need: T-shirt or T-shirt • Design for machine embroidery Hare Average density cutting off stabilizer Erasable marker or chalk Temporary fixation adhesive (we recommend using Gunold KK100) 1. First you need to wash the T-shirt before applying embroidery. Otherwise, there is a possibility that she will just simply sit down or pull off. To choose the right place for the application of design, print the information file that is in the archive. Place it on the fabric where the embroidery will be and mark its center and two axes. Traditionally, embroidery is placed 3 centimeters lower from the neckline, behind or in front. 2. Then remove the T-shirt. Spray the temporary fixation adhesive onto the web of the cutting stabilizer and glue it to the T-shirt. We recommend using a tear-off stabilizer for T-shirts, as this can lead to tightening, wrinkling, and even skipping stitches. H. Turn the T-shirt back. 4. Tie the shirt into the hoop so that the marked center line is in the middle and the axis coincided with marks on the hoops themselves. 5. Twist the rest of the fabric of the T-shirt so that it does not fall under the needle. For this you can use special clamps. b. Set the hoop in the machine so that the needle is in the marked center of the embroidery. Embroider the design. After the end of embroidery, cut off excess stabilizer residues, receding somewhere 1-2 cm from the embroidery itself. Unique and original t-shirt is ready.