Jump to content

Heart-shaped decoration for a garment

(0 reviews)

Heart-shaped decoration for a garment

A few strips of fabric, a sole-colored T-shirt or a tank top, and 15 minutes of your spare time—that’s all you need to create a heart-shaped decoration. You can use the tips described in this tutorial to decorate any garment, thus giving your old clothes look new and interesting look. Hearts are perhaps most often associated with the Valentine’s Day, but one doesn't need an excuse for wearing them on any other day of the year. Don’t be afraid to experiment! Not only it will help you to revamp your clothes but also give you lots of joy!

Materials

  • A T-shirt
  • Thin silk cording
  • A gathering foot
  • A Ruffler foot
  • A cording foot for sewing on three cords
  • Strips of non-fraying fabric (netting, tulle netting, thin knitwear).

Peach-colored T-shirt and tulle netting

Heart-shaped decoration for a garment

On a T-shirt, mark the center front line. Place a heart-shaped cutout on top of it and trace the outline with a piece of tailor’s chalk or a fabric marker. Cut the non-fraying fabric into strips 3 to 6 cm wide.

t-shirt-for-embroidery.jpg

Heart-shaped cutout on a tank top

Strips of netting material

Attach the Ruffler foot to your machine. Select the appropriate pleating depth and stitch the strips along the center line, gathering the fabric as you go. If you haven’t yet used the Ruffler foot, here’s the tutorial (coming soon!):

If you need narrow pleats of the equal width, you can use a gathering foot instead. For instructions, see this tutorial (coming soon!):

Long red strip of gathered netting

Gathered strip of red netting

Piece of netting on a peach-colored fabric.

Pin the pleated strip of fabric along the outline of the heart and straight-stitch it to the fabric. You now have a decorated garment!

After I had slipped my T-shirt over a mannequin, it became clear that I failed to get the measurements right, so I cut the upper part of the pleats a bit, thus making the decoration even more impressive.

Heart-shaped netting decoration closer look

Red and white netting stitched to tank top

Peach-colored tank top with heart-shaped decoration

Alternately, you can use knitwear strips and cords. Cut the thin knitwear fabric into strips 3 to 6 cm wide.

While cutting, pay attention to the wales. They should be vertically oriented: in this way, the fabric edge won’t fray, and there will be no runs.

Gather the knitwear strips, using the method described above. Trace the future decoration to the fabric. In my case, these are two halves of a heart, to the right and left of the straight line. Pin the gathered knitwear strips along the outline.

Blue strip of knitwear

Two halves of a heart cutouts

Blue knitwear strip with pins

Attach the cording foot and feed three cords into it. Select a three-step zigzag stitch. Stitch the gathered strip to the fabric by the cord.

Cording foot with three cords in it

Gathered blue strip of fabric with pins

Red and two white cords in a cording foot

On turns and at corners, raise the foot and rotate the fabric under it. Having adjusted the fabric position, pull the cords slightly and continue sewing.

Blue knitwear strips stitched with cords

Blue gathered strip of fabric stitched with three cords

Pink tank top with blue gathered strip decoration

Original text by Irina Lisitsa

Edited by Irina

User Feedback

There are no reviews to display.

Recently Browsing 0

  • No registered users viewing this page.