
Sew a Soft Storage Basket
๐ Pattern Pieces
Base (circle)
Diameter = basket width (e.g., 25โ30 cm).
Cut 1 piece from outer fabric + 1 piece from lining fabric + 1 piece from stabilizer (fusible interfacing, batting, or foam).
Side (rectangle)
Height = desired basket height (e.g., 25โ30 cm).
Length = base circumference + 2 cm (seam allowance).
Cut 1 piece from outer fabric + 1 piece from lining + 1 piece from stabilizer.
Optional handles โ cut 2 strips from the same fabric or use webbing. Baby girl and her little red heart embroidery design
๐งต Sewing Instructions
Prepare the side panel: Sew the short edges of the rectangle together to form a cylinder.
Attach the base: Sew the circular base to the bottom of the cylinder (first lining, then outer fabric).
Assemble basket and lining: Place outer basket and lining right sides together. Sew along the top edge, leaving a small opening.
Turn inside out: Pull through the opening, press edges.
Topstitch the upper rim for a clean finish.
Add handles if desired.
โ๏ธ Pattern Sketch
Side (rectangle)
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ โ Height = 25โ30 cm
โ โ
โ โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Length = base circumference
Base (circle)
โโโโโโโโโโโโโโโโ
/ \
| | Diameter = 25โ30 cm
\ /
โโโโโโโโโโโโโโโโ
๐ก Tips
For sturdiness, use foam, thick felt, or fusible interfacing between layers.
Embroider the design before assembly, centered on the side rectangle.
Quilting the side panel with stabilizer will help the basket keep its shape.
Download PDF pattern
Recommended Comments