Carol1950 Posted February 23, 2014 Share Posted February 23, 2014 Why do the 1B2 stops occur without being setup to stop? Sometimes they happen several times.I use 1B2 for puff stuff, but not in the files where it mysteriously happens. Quote Link to comment
ramages Posted February 23, 2014 Share Posted February 23, 2014 When programming the needles, do you sometimes program the same needle twice? This would cause a 1B2 error. Quote Link to comment
Carol1950 Posted February 23, 2014 Author Share Posted February 23, 2014 When I'm designing I use many colors to make seeing easy and then set the colors to the same color in the machine. The 1B2 needs to be avoided. How? Quote Link to comment
cousette31 Posted February 23, 2014 Share Posted February 23, 2014 "1B2" message is shown when a color changing on Tajima machines. When you make a design you use many colors so the design file has included many STOP commands. That is why when you sew the design with a Tajima machine, Tajima machine shows "1B2"( = STOP for Color changing) You can use many colors during making a design for your own purpose but when finishing the design, you should unify those many colors for the final numbers of color you really use for the production. Kazu@Tajima, Japan. Quote Link to comment
ramages Posted February 23, 2014 Share Posted February 23, 2014 When programming the needles, do you sometimes program the same needle twice? This would cause a 1B2 error Quote Link to comment
KKrix327 Posted January 31, 2017 Share Posted January 31, 2017 Press B once and make sure the settings are correct - AC:o AS:o That is the auto color change and auto start. Quote Link to comment
Loisvr Posted February 7, 2019 Share Posted February 7, 2019 So the first color sews and then the B1 sets a stop, I have tried to turn it off and I have the AC and AS settings on yes. I've gone into my software and it doesn't show I added a stop either. driving me nuts 1 Quote Link to comment
Ashtorah_Blak Posted December 23, 2020 Share Posted December 23, 2020 My machine stops and the AcAs is on. But it doesnt do this for other machines. Why is it doing it on one but not the other? 1 Quote Link to comment
diver361 Posted December 23, 2020 Share Posted December 23, 2020 23 minutes ago, Ashtorah_Blak said: My machine stops and the AcAs is on. But it doesnt do this for other machines. Why is it doing it on one but not the other? What embroidery machine you have? 1 Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.