Arkansas Razorbacks Logo embroidery design

[violet 191]

Is there any way you can add the cross sections on the A's in this pattern?  When it stitches, the A's look kind of like O's so it looks like it reads Razorbocks.

 

[diver361 6,474]

Hello

Sorry, we not understand.

Please add more information what you need.  Best way if you attach picture.

Cheers

[violet 191]

Here is a picture of the design I pulled up in Wilcom True Sizer that shows the A's are not complete.  There are no stitches there to complete them as it is shown in image in your store.  Thanks for your help.

[diver361 6,474]

We think Wilcom True Sizer not correctly shown Arkansas Razorbacks Logo embroidery design. We check and attach screenshot created in Embird. Editor- All. ok. Also we resend this version via e-mail.

[violet 191]

razor1a.pes& and razor1b.pes do not have the finished A's. Every other file I pulled up was finished but these two.  I guess I can just use the dst files since you have sent them to me, but you may want to check the two pes files I mentioned above, they are not complete when stitched.

[diver361 6,474]

We check both files razor1a.pes and razor1b.pes. All files complete. We resend these files. Please check again. If you have photo stitched variant please attach. Sorry, for problem, we need found here mistake.

[violet 191]

This is what I stitched from the pes file.

>

[diver361 6,474]

We add density for this bloc, we thik these stitches. left. Please decrease speed to  450 -5000 stitches per min, we think is machine left these stitches, bcs this block very small for file razr1a - 3 stitches.

Cheers

[violet 191]

Thank you. !! All sewed beautiful