violet Posted January 12, 2015 Share Posted January 12, 2015 I sewed this logo design out today. I found the density to be extremely low, particularly in the center of the embroidery design and in the lettering of Mavericks. I could see the white of the sweatshirt through the stitches. To correct this problem I had to go over it twice increasing both the stitch count, and the time to sew out, quite a lot. Is there done thing you can do to correct this problem? Thank you, 1 Quote Link to comment
diver361 Posted January 12, 2015 Share Posted January 12, 2015 We not listen about problem with this embroidery, This is standard density 0.4 stitches per mm. This option best for cotton, jeans. Some fabrics as knitted need special parameters. This is not problem. Please explain -how much % you want increase. And which format you need? 1 Quote Link to comment
test8 Posted February 11, 2015 Share Posted February 11, 2015 I ordered the Mariners logo embroidery design and I pressed the wrong format can you please send it to me in the Brother pes format? Thank you. 1 Quote Link to comment
diver361 Posted February 11, 2015 Share Posted February 11, 2015 You can back to order history and change format, which you need, and download new. Help I picked the wrong format I picked PEC when it should have been PES I have a brother HE1 machine how can I get this format please advise Cheers 1 Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.