Jump to content

EmbroideryWare Free Digitizing Software

Featured Replies

Posted

Hi Everyone,

I am writing a free program for machine embroidery. It's totally free. I started the project about three months ago because I wanted to create a program that would do interesting stitching along a path that my commercial software did not do.

It has evolved to something much more than that. The satin stitching is pretty complete. I am still refining fills, they work but do more jumps than I would like.

Please check it out and let me know what you think of my program.

https://sourceforge.net/projects/handstich/

tried to download but say the sight is not working so could not download

 

yep it says it is offline

 

2 hours ago, ElizabethLM said:

yep it says it is offline

 

We upload this software to our server 

 

On 11/3/2016 at 10:46 PM, jimmysb said:

Hi Everyone,

I am writing a free program for machine embroidery. It's totally free. I started the project about three months ago because I wanted to create a program that would do interesting stitching along a path that my commercial software did not do.

It has evolved to something much more than that. The satin stitching is pretty complete. I am still refining fills, they work but do more jumps than I would like.

Please check it out and let me know what you think of my program.

https://sourceforge.net/projects/handstich/

 

I down loaded your software but it is only showing pes. and dst. is that all the formats it does???

also could you talk it through and go a bit slower not sure what to do .

I was able to download with no problems about 5 minutes ago. Just thought you'd like to know. Now off to watch the video!  :)

My first attempt using EmbroideryWare..

P_20160317_130438_1.jpg

6 hours ago, calston93 said:

I was able to download with no problems about 5 minutes ago. Just thought you'd like to know. Now off to watch the video!  :)

We upload this software to our Download section.

its working now 

 

  • Author
22 hours ago, marpat said:

I down loaded your software but it is only showing pes. and dst. is that all the formats it does???

also could you talk it through and go a bit slower not sure what to do .

Hi Everyone,

Currently the program only inputs PES and outputs DST.  Eventually I want to make it be able to input DST and output PES so color info goes with it.  My priority though is to add more design functions and improve the ones that already exist.

  • Author
23 hours ago, drna said:

My first attempt using EmbroideryWare..

P_20160317_130438_1.jpg

Nice work!  I am impressed that someone other than me, the developer, is using EmbroideryWare!  That makes me happy :).

Hello, I downloaded it and will stay this weekend. I would come to my mind also;-)
thank you very much for this tedious job you offer graciously

:D:wub:

  • 2 weeks later...
  • Author

Hi everyone,

There is a new release of EmbroideryWare posted recently.

I am really proud of the this release. smile.gif

The biggest improvement is being able to set the stitch order of a fill.

Jim

https://sourceforge.net/projects/handstich/

Jim, it looks like you are really working on your software:-) I am going to watch your videos and will download the new version tomorrow. I have used Embird for years but it is always nice to see others doing something with embroidery software. Back when I got started with embroidery, most of the software took a dongle and was horribly pricey - way out of my notion of affordability. Now there are a few out there that are more affordable. On the other hand, the machines have gotten ridiculously expensive (at least in my view).

I look forward to seeing how EmbroideryWare develops and will try to digitize something after I download it and let you know how it goes.

  • Author

That is awesome!

Hi Everyone,

I am pleased to announce that I now have a web page http://www.embroiderywaresoftware.com/
My web page will be the best place to see what is going on with EmbroideryWare development.

EmbroideryWare is still free. I have a storefront where it can be download for free. 

The program will still be up on sourceforge too. I think the webpage though in the long run will be a better way to communicate with my users and also show some projects I am working on.  I am after all a hobbiest embroiderer first and a programmer second!

Jim

  • 2 weeks later...

Does your software have the ability to upload a jpeg file? 

  • 2 months later...
  • Author

Hi Everyone,

I just wanted to let you all know that EmbroideryWare has moved into a new phase. It is now a hobby buisness. Wish me luck and thank you for trying the beta version.

I want to personally thank anyone who has given me feedback. I have learned alot along the way and have some wonderful plans for the program.

If your are interested in what I am up to with EmbroideryWare you can check out the web page http://www.embroiderywaresoftware.com

Jim

  • 3 months later...

I cant download...ERROR ERROR ERROR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • 3 months later...
  • Author

Hi Everyone,

It been a while since I posted.  EmbroideryWare has come a long way since I introduced the Beta version back in March 2016.  It went into a commercial phase back in June of 2016 and has been updated quite a bit since then.

If any of you are interested in where it is now you can check it out at https://www.embroiderywaresoftware.com or see what people are saying about it on https://www.facebook.com/EmbroideryWare

Thank you for trying it out.

Jim

17 minutes ago, jimmysb said:

Hi Everyone,

It been a while since I posted.  EmbroideryWare has come a long way since I introduced the Beta version back in March 2016.  It went into a commercial phase back in June of 2016 and has been updated quite a bit since then.

If any of you are interested in where it is now you can check it out at https://www.embroiderywaresoftware.com or see what people are saying about it on https://www.facebook.com/EmbroideryWare

Thank you for trying it out.

Jim

You can upload trial version in Our download category https://embroideres.com/forum/files/

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...