Heather Burgoyne-Monahan Posted June 30, 2018 Share Posted June 30, 2018 Pleeeease help! Bobbin runs out in middle of project and I follow instructions and change the bobbin and when I go back to embroider, the needle is way off from where I stopped! Even when I back up the stitches, they aren’t even in the same place on the pattern! Basically What’s on the screen is in a different place than on my actual material!! 1 Quote Link to comment
Bernice Campbell Posted July 1, 2018 Share Posted July 1, 2018 Quote I don't know how to fix this but to me it would be a good idea to start with FILLED BOBBIN SO IT DOESN'T RUN OUT.....I have the 6200D Dreamweaver and I don't have that problem. 1 Quote Link to comment
auksesh Posted July 1, 2018 Share Posted July 1, 2018 try to go forward by one stitch if it's a large hoop, it might be go back to the place. 1 Quote Link to comment
auksesh Posted July 1, 2018 Share Posted July 1, 2018 Also can be, that your bobbin sensor told you about run off bobbin too late, in that case you have to blow off the lint off the sensor or go to the dealer and he will do it for you for $60 1 Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.