logan Posted March 22, 2014 Share Posted March 22, 2014 Hi Guys i am having so much trouble with my lock stitches - if possible can i email someone a screen dump showing my problem then see if you know how to correct it. i have used the same technique for years with lock stitching, i recently purchased and 8 head and single head embroidery machine. all the sudden the locking stitches are now jumping out from the embroidery leaving little tails on everything. i am not sure wether this is a setting in the embroidery machine or in the digitizing. any response would be hugely appreciated!! as i am ripping my hair out! thanks Quote Link to comment
valdubonheur Posted March 22, 2014 Share Posted March 22, 2014 GOOD LUCK! This has been an on going issue for years:) Quote Link to comment
siv1987 Posted March 22, 2014 Share Posted March 22, 2014 I don't believe that there is an easy solution.You have to go into the DSG file and?move your stops to the opposite side on each of the problem lock stitch.? Quote Link to comment
tiply Posted March 22, 2014 Share Posted March 22, 2014 Are you using a line lock? Try switching to a basic or vice versa. Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.