Garie Chavez 0 Posted February 5, 2018 Share Posted February 5, 2018 I have a Tajima TEHX-C1501 embroidery machine. I went to power it up last week and I could hear the fan and motor but no display. I went to check the motherboard and found 2 lithium batteries. One battery read at 2.9 volts and the other only read at 1.5 volts as shown on picture. Could this the problem why i'm not getting a display and the embroidery will not initialized? Any tips or help is greatly appreciated. (side note*** I have this machine for over 5 years and have turned it on.) Thank you. Quote Link to comment https://forum.embroideres.com/forums/topic/3320-tajima-tehx-c1501/
Apgdesigns 1 Posted June 7, 2022 Share Posted June 7, 2022 Hi, did you find a solution to this problem? Mine is doing the same. 1 Quote Link to comment https://forum.embroideres.com/forums/topic/3320-tajima-tehx-c1501/#findComment-19212
diver361 6,467 Posted July 25, 2022 Share Posted July 25, 2022 You nead ask Tajima dealer support. This is heavy problem. Quote Link to comment https://forum.embroideres.com/forums/topic/3320-tajima-tehx-c1501/#findComment-19757
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.