harvey074 Posted February 22, 2014 Share Posted February 22, 2014 I thought we could load a .PDF image to digitize in PE-Design Next. I am going to "Image, Load", but PE-Design doesn't recognize the .PDF file. Can someone tell me how to load this file? Quote Link to comment
jdemyers Posted February 22, 2014 Share Posted February 22, 2014 You cannot open a PDF file in BROTHER PE-Design (any version), you will need to covert the PDF to a JPG or similar file. You can do this in a program like Corel Photopaint or Adobe Protoshop. I also did some searching and found some software that will convert a PDF file to a JPG. Here is a link: http://www.pdf-to-jpg.com/ Let me know if you have any questions. Quote Link to comment
siv1987 Posted February 22, 2014 Share Posted February 22, 2014 Harvey BROTHER SOFTWARE won't do PDFs. As far as I know anyway. This is what I do. Screen capture the PDF. Paste into a graphic program and save as a JPG or BMP. Either one will be able to bring into a backdrop Quote Link to comment
harvey074 Posted February 22, 2014 Author Share Posted February 22, 2014 Thank you. I thought I was going crazy because I thought you could take it into PE-Design Next. I ended up printing the PDF and scanning into Corel Paint, saving it as a .jpeg file and then pulled it into Brother PE-Design.Next time, I will try the conversion in the internet site your provided. Thanks again. Quote Link to comment
diver361 Posted March 5, 2014 Share Posted March 5, 2014 Easy convert PDF format via any Image editor. Simple way. Open PDF file in Adobe Acrobat reader (free software) and click Ctrl+ Print Screen. And Ctrl +V (paste command) in image editor. File-Save - and choose graphic format. Quote Link to comment
aliaanderson Posted August 4, 2016 Share Posted August 4, 2016 On 2/22/2014 at 0:42 AM, harvey074 said: I thought we could load a .PDF image to digitize in PE-Design Next. I am going to "Image, Load", but PE-Design doesn't recognize the .PDF file. Can someone tell me how to load this file? You can use this link http://pdf-to-jpg-convert.en.softonic.com to convert PDF to JPG Quote Link to comment
diver361 Posted February 19, 2023 Share Posted February 19, 2023 Hello! PE-Design Next software does not support the direct import of PDF files for digitizing. However, there are a few steps you can follow to import your PDF image for digitizing: Convert your PDF image to a supported file format such as BMP, JPEG, or PNG using a third-party software like Adobe Acrobat or an online conversion tool. Open PE-Design Next and create a new design. Click on "Image" from the main menu, then select "Load." Choose the converted file you just saved and click "Open." The converted image will now be displayed on the screen, and you can start digitizing your design. I hope this helps, and let me know if you have any further questions! Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.