test5 Posted March 25, 2014 Share Posted March 25, 2014 I've been having problems with the Sierra 11 version. Just a simple opening up of a .dst file will cause it to freeze up and all I get is a small cross-hatch cursor, so I cannot even close out of the program. I use Ctrl+Alt+Delete to close the program down. When I do get a file to open, (a .DSG I cannot get it to sew out in 3D. Does anyone else have these problems? Thanks for any input. Quote Link to comment
test5 Posted March 25, 2014 Author Share Posted March 25, 2014 Now when I try to open up a .DST file, I get the message "Sierra Embroidery Office 11e has encountered a problem and needs to close. We are sorry for the inconvenience." Then... it doesn't close down. Quote Link to comment
valdubonheur Posted March 25, 2014 Share Posted March 25, 2014 Sounds like it might be a RAM issue. How much do you have? Has doing a defrag helped? Sierra embroidery office is a large program and takes a lot of memory to operate. Sierra Office I would think would need all your computer vitals. We all have different computers and each act differently. Send them a email and include your OS, RAM, Processor and hard drive info. Quote Link to comment
test5 Posted March 25, 2014 Author Share Posted March 25, 2014 Have already sent info to Sierra support .I can open the same design in ERA and the program does not freeze up, it's just in Sierra Embroidery office 11. Thanks for your input, Quote Link to comment
valdubonheur Posted March 25, 2014 Share Posted March 25, 2014 I think they are having problems with Sierra Embroidery Office 11 so hopefully it will be resolved soon.I'd use Sierra ERA until. I have Sierra ERA but do most all my work in the older 10. Too many bells and whistles (options) in Sierra ERA for me to contend with. I'm just a simple guy. A lot of what you see on my site was done with a board that's how simple I am. ) Quote Link to comment
violet Posted March 25, 2014 Share Posted March 25, 2014 I don't think it is a RAM thing. Just got a brand new computer for this software, it is the only thing on the computer and it is shutting down after ever 30 or 40 minutes. Quote Link to comment
Airbrush77 Posted March 25, 2014 Share Posted March 25, 2014 If you are having a problem with the software freezing, can you check under Preferences-VideoCard Settings-Video hardware acceleration ? I would like to know what your setting is for numbers is (0 3). If you are using 3, can you let me know what type of video card your computer has and the operating system (XP / Vista / Windows 7). Slow Drawing in 3D is not available when using option 3. Quote Link to comment
test5 Posted March 25, 2014 Author Share Posted March 25, 2014 I set my software to Default and under 1, I put automatic. It still froze up bringing in a .dst file. I then set in Video card setting it to Enable Anti-aliasing (no) The Renderer was grayed out. 3 was set to manual, maximum (3) Still froze up. Next will be Enable Anti-aliasing (yes) and (automatic) for the acceleration THAT WORKED!I guess I will try out a few more machine embroidery designs, but at least it didn't freeze up. I'm running XP, I can't find the information on the video card yet (I'm not a geek), but I do have dual monitors hooked up to the same computer.Hope this helps Quote Link to comment
wissewer Posted March 25, 2014 Share Posted March 25, 2014 I'm having the issues on my Windows XP machine. Reinstalled the software on a machine running Windows 7 and it seems to be running a little better. Quote Link to comment
Kelley24 Posted March 30, 2014 Share Posted March 30, 2014 Increase performance , change video card (best choice video RAM 1-4 Gb), buy new hard dive, best flash, minimum rpp 10000, All these options critical for Sierra embroidery software Windows Xp, is very old for 11 version. Limit to 4 gb.... Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.