Search the Community
Showing results for tags 'tension'.
Found 8 results
-
View File Tension Test for different formats I forget to create tension tests on my different types & weights of threads. This is a six stitch out for convenience. Place different brands, types, weights to test their tension. Pat Submitter pat71896 Submitted 08/28/2022 Category Cartoon -
Version any popular format
89 downloads
I forget to create tension tests on my different types & weights of threads. This is a six stitch out for convenience. Place different brands, types, weights to test their tension. Pat -
So recently I have encountered a problem with my machine. It started getting a bit loud and the recognition from my own digitised designs started to go bad and my embroidery looks bad. Straight satin stitches have random cuts don’t for consistent tension when looking at the back (sometimes more bobbin and sometimes less). I’ve tried fixing the tension and when doing a test run it seems to be ok and consistent but when I do my own designs it goes bad even though I’ve done these designs many times and there was never an issue. I changed my needle out, cleaned the machine and I don’t know what else I could do. My machine just started acting up and I would appreciate some help if anyone encountered this issue yet.- 1 reply
-
- 1
-
-
- bobbin
- thread error
- (and 1 more)
-
Hello, I have a worry with the setting of my tenssions on my toyota AD860 embroidery machien. I can not find the right setting for the wires. Could you tell me what are the tenssion numbers "usual" on this type of machine please? thank you very much (Starting on multi-needle) -
Puckering design?
HoneyPhantomhive posted a topic in Questions and Answers about embroidery machines
I recently got a Brother SE-400 and I love it! I make patches and I managed to make a few before I started to have issues. The original design is below. My first try went like this... (if you can't tell, it's bent like a bowl) This is what it looks like when I flattened it using my fingers... (there's still considerable puckering around the text) Then I tried it again, this time with a lower tension. It started out fine, but by the time it got to the yellow (the third color), it was puckering again. When I tried to do the black, it had puckered so bad the needle was only going down in one spot. It was unable to move. I used 3 layers of iron-on stabilizer and I sewed them together in a desperate attempt to stop the puckering. It's not necessarily that the fabric around it is puckering, its that the actual DESIGN is. I use medical tape to keep it from sliding around in the hoop. I still have puckering!! What should I do? -
So my Brother SE400 is all of the sudden not filling in the letters it embroiders correctly. Hoping that maybe by the pictures you might be able to tell me what's happening. Some details: I've successfully used this design before (third picture of red initials is correct). I bought the font off of etsy. The only difference between the red initials and my incomplete black ones is that I changed thread brands from Coats & Clark to Sewology (Coats & Clark is a cheap brand from Walmart, Sewology is supposed to be nicer?). I was using a 4 on the tension dial and also changed to 3 and 2 in trying to fix the problem. Thoughts? Surely someone else has had this problem and recovered? I've posted the front and back (in black), as well as my successful use of the font in red.
-
I am need of help ASAP. Order due tomorrow. We are sewing a design that is letters PRMS and had it custom digitized. Upon sewing on polo shirts inside the R and top part of the S it is breaking fabric down and causing a hole on both letters. I have changed the tension and backing but still doing it. We have sewn this same design on dress shirts with no problem. Digitizer is saying that it is not the file. Appreciate any suggestions anyone has. Thanks
-
Hello guys, today I checking the embroidery thread tension of the upper and bobbin. Before i us default option. I have gauges for both but just wanted to know the tension I should be looking for? My new customer have a big order.. Fabric fleece. Thanks Aussie Dig
.jpg.a5f30dbd6ff938cc1d1453ffc8db4289.jpg)
.jpg.2eeb80aaf2e9710c40d1dfd91b60d79b.jpg)
