Jump to content

Recommended Posts

Hi everyone,

I have a Brother NV800 Embroidery machine. I've been doing some topstitch experiments and run into some issues.

As you can see in the attached photo, the original test (outlined in blue) with a 100/2 Polyester thread looks good.

But when I used a 30 Thickness Cotton embroidery thread, I'm getting these weird results (outlined in red).

The stitch width for both examples is 2mm. I tried adjusting the sewing speed to minimum for cotton, and even adjusted the tension, to no avail. The machine's instructions say I can't use a thread of 20 or thicker.

I'm using the same thread for topstitch and bobbin.

 

Any advice?

 

Thanks!

example.jpg

  • Like 1
Link to comment
Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...