Elspeth 19 Posted March 3, 2014 Share Posted March 3, 2014 I have an issue I've been facing for quite some time now. Occasionally, my needle misses the bobbin and causes me to have to re-thread the needle. This happens frequently, for example, I could be embroidering 1 color or multiple colors and when the machine cuts and moves to the next spot, it starts, but misses the bobbin and causes me to have to re-thread the needle. This is quite a nuisance especially when there's 300 shirts to run and it does it on every one! Sometimes the same spot, sometimes different spots. Any suggestions? Thanks. Quote Link to comment https://forum.embroideres.com/forums/topic/510-needles-missing-the-bobbin-frequently/
diver361 6,474 Posted March 3, 2014 Share Posted March 3, 2014 I recommend you contact your local distributor. Quote Link to comment https://forum.embroideres.com/forums/topic/510-needles-missing-the-bobbin-frequently/#findComment-2368
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.