Jump to content

Beautiful design, Morning owl look amazing.

This embroidery work up perfectly and stitch out nicely. 
Buy Now

Excellent stitches and original style

Stitched out beautifully! Looked amazing and no issues!
Buy Now

Loving birds.. Wonderful designs, stitched out beautifully

Really cute, You love this when you stitched it. Would love more of same designs.
Buy Now

Our designs looks great

Stitched out beautifully! Wonderful decoration!
Buy Now

Adorable design. Stitches out beautifully.

"Thanks so much for this design It's lovely and stitched out beautifully on leather."
Buy Now

Recommended Posts

I purchased the Elsa embroidery and it stitched out good but a little dense. Im purchasing a couple more but was wondering if you did any applique especially in the Disney Frozen.


Share this post


Link to post
Share on other sites
On 6/4/2014 at 7:21 AM, naomi said:

I purchased the Elsa embroidery and it stitched out good but a little dense. Im purchasing a couple more but was wondering if you did any applique especially in the Disney Frozen.

This is standard density 0.4 stitches per mm. If you need less please write how much % need decrease and size which you want. This is not problemю Frozen applique near time.

Bath towel with elsa frozen embroidery design

Share this post


Link to post
Share on other sites

We send another version via e-mail. Please check your account.

 

I just purchased a few designs and one of them (all sizes) is too large for my machine. I have a 100x100 hoop and the design says 96 × 100 mm. This should work but my machine says it is too large.
The embroidery design is Frozen Sisters.
Is there anything you can do to help me?
Thank you,

Share this post


Link to post
Share on other sites

would like just the FACE on olaf size about 1 and 1/2 inches. also Sofia, face only same size. will need many more of these in the future. thanks, betty


Share this post


Link to post
Share on other sites
Thank you so much for answering my question.  I have trouble saying what percentage because its not the complete design. Where I found that it was so dense on the t-shirt is where there is multiple stitching on top of each other.  I tried with my software Designer Plus I use with my Bernina and was unable to remove the under stitching not the underlay but the overlaps. I should have been able to remove overlaps with my softwarebut it would not let me. That is where the stitching is so dense.  I purchase Anna and Elsa and Anna last week. I've stitched Anna out and its great except at the bottom of the hair where it lies on the dress and the O in frozen. Is it possible for you to remove the overlaps of the stitching with your software

I will say your designs are the greatest out there. I've done 4 shirts for my granddaughters and they love them. I'm looking for to the applique!

Have a great day.  Looking forward to hearing from you

Share this post


Link to post
Share on other sites

 

Thank you so much for answering my question.  I have trouble saying what percentage because its not the complete design. Where I found that it was so dense on the t-shirt is where there is multiple stitching on top of each other.  I tried with my software Designer Plus I use with my Bernina and was unable to remove the under stitching not the underlay but the overlaps. I should have been able to remove overlaps with my softwarebut it would not let me. That is where the stitching is so dense.  I purchase Anna and Elsa and Anna last week. I've stitched Anna out and its great except at the bottom of the hair where it lies on the dress and the O in frozen. Is it possible for you to remove the overlaps of the stitching with your software

I will say your designs are the greatest out there. I've done 4 shirts for my granddaughters and they love them. I'm looking for to the applique!

Have a great day.  Looking forward to hearing from you

 

Ok we recheck these embroidery designs. Also we add Frozen applique embroidery near time.

Share this post


Link to post
Share on other sites

Good day<

Yesterday I purchased various Frozen embroidery designs in your library – however am concerned about the one design – Anna Badge embroidery design. There is a flaw in the embroidery across the middle of the face. I have tried downloading this is other formats however it is the fault is the same for all. Please can you check on this and advise.

Many thanks

Share this post


Link to post
Share on other sites
On 6/13/2014 at 8:46 AM, Berez said:

Good day

Yesterday I purchased various Frozen designs – however am concerned about the one design – Anna Badge.

There is a flaw in the embroidery across the middle of the face.

I have tried downloading this is other formats however it is the fault is the same for all.

Please can you check on this and advise.

>Many thanks

We check Anna Badge embroidery and not found any mistakes and problems, please attach screenshot or photo with problems, Also we attach our screenshot.

Embird software screen with Anna embroidery design

Share this post


Link to post
Share on other sites

Please see my attached documentation that this design will not fit whether it says it will or not.

PE-Design software screen with embroidery design

I need a solution.

Share this post


Link to post
Share on other sites

Brothers's  embroidery machines have a limit to the number of stitches. Usually you have this (screen shot form PE-DESIGN NEXT) message;

Warning screen in PE Design embroidery software

This limits (32000 stitches)  have these embroidery machines; Brother PC-8500, Brother PC-8200, Brother PC-6500, Brother PE-400D, Brother PE-180, Brother PE-170, Brother PE-150, Brother SE-400, Brother SE-270

How change size embroidery design in PE Design software

For fix problem, please send request Send for change embroidery design size; We send another file via e-mail.

Share this post


Link to post
Share on other sites

Many thanks for your reply

Please see attached print with fault line across the face.  I have marked this for your reference. This fault is not only on VP3 but also the other formats which I have checked. Please can you see what you can do to rectify this problem.>Anna 3.pdf

Share this post


Link to post
Share on other sites

This is standard overlap stitches (additional stitches for stretch fabrics). No worries, you can see this in your software (not right simulation), after stitching you not see this.


Share this post


Link to post
Share on other sites

Recently i bought the above frozen picture together with another.  I have a problem saving to my thumb drive. It stated that it has too many stitches and therefore could not be saved into card or thumb drive. Can you help by telling me how to reduce the stitches or ?

Your assistance is much appreciated.

Share this post


Link to post
Share on other sites

Recently i bought the above frozen picture together with another.  I have a problem saving to my thumb drive.

It stated that it has too many stitches and therefore could not be saved into card or thumb drive.

Can you help by telling me how to reduce the stitches or?

Your assistance is much appreciated.

 

No problem, please tell how many stitches you need.

Share this post


Link to post
Share on other sites

your embroidery design ELSA with Frozen(word) was purchased by me last week.  Now I need that design SMALLER 1.5 inch by 1.5 inch.  will repurchase when available.  thanks,


Share this post


Link to post
Share on other sites

your embroidery design ELSA with Frozen(word) was purchased by me last week.  Now I need that design SMALLER 1.5 inch by 1.5 inch.  will repurchase when available.  thanks,

We  can  made  this  (just need your embroidery format), but some some details may be left.

Share this post


Link to post
Share on other sites

No problem, please tell how many stitches you need.

I also do not know.  I am using the 10 x 10 cm hoop.  Therefore i need the stitches to be able to fit it in.

Please advise.

Share this post


Link to post
Share on other sites

I also do not know.  I am using the 10 x 10 cm hoop.  Therefore i need the stitches to be able to fit it in.

Please advise.

Which design need change&

Share this post


Link to post
Share on other sites

This is standard density 0.4 stitches per mm. If you need less please write how much % need decrease and size which you want. This is not problemю Frozen applique near time.

attachicon.giffrozen_embroidered_towel.jpg

Cant wait till the appliqué comes out. You said you rechecked the design. Did you change it in any way?  I was discussing it with someone that repairs the Bernina machines but also digitizes a lot of designs. He was trying to explain that since it was not digitized in Art but changed from another form was the reason I could not take away the overlay. If you did change anything may I redo load it?

Again thank you so much.
  • Like 1

Share this post


Link to post
Share on other sites
On 6/20/2014 at 11:48 AM, naomi said:
Cant wait till the appliqué comes out. You said you rechecked the design. Did you change it in any way?  I was discussing it with someone that repairs the Bernina machines but also digitizes a lot of designs. He was trying to explain that since it was not digitized in Art but changed from another form was the reason I could not take away the overlay. If you did change anything may I redo load it?
Again thank you so much.

Applique in work. Yes, no problem, every time, you can back to Order History and redownload your embroidery designs.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...