ZloiCiuvac 63 Posted August 7, 2014 Share Posted August 7, 2014 I have a machine embroidery design that is in Barudan FMC format that I need to transfer to Tajima format. Any help or suggestions would be greatly appreciated. Thanks, Quote Link to comment https://forum.embroideres.com/forums/topic/770-transfer-embroidery-designs-from-baurdan-format/
Shellie 70 Posted August 7, 2014 Share Posted August 7, 2014 No you can´t. Barudan FMC format is an especific format that only works on very old barudan machines with a special component like melco dos systems. Quote Link to comment https://forum.embroideres.com/forums/topic/770-transfer-embroidery-designs-from-baurdan-format/#findComment-3954
lone 1,800 Posted August 7, 2014 Share Posted August 7, 2014 No you can´t. Barudan FMC format is an especific format that only works on very old barudan machines with a special component like melco dos systems. This embroidery format is a DOS based format, for an older style Barudan embroidery machines, you need a internal floppy drive, and you need to install a pulse driver for the floppy disk drive. This driver is called Pdrive and it can be found on the cd in the support folder under the folder for floppy drives Quote Link to comment https://forum.embroideres.com/forums/topic/770-transfer-embroidery-designs-from-baurdan-format/#findComment-3955
diver361 6,470 Posted August 17, 2014 Share Posted August 17, 2014 What's problem save in standard DST format, and after that convert us Embird file manager. This is simple and cheap way (Only around 1000 usd) Quote Link to comment https://forum.embroideres.com/forums/topic/770-transfer-embroidery-designs-from-baurdan-format/#findComment-4018
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.