tiply Posted February 7, 2014 Share Posted February 7, 2014 I read about Sequence view in manual. Ant not see this in my Tajima. Where this option& Without this i not check order of layer or reorder digitizied blocks. Quote Link to comment
diver361 Posted February 7, 2014 Share Posted February 7, 2014 Which version you have? Quote Link to comment
tiply Posted February 7, 2014 Author Share Posted February 7, 2014 Version 12 ,level Maestro. Quote Link to comment
ramages Posted February 7, 2014 Share Posted February 7, 2014 When you press (Shift + T) and the sequence fails to come up means that the co-ordinates of the last know location is off the edge of the screen. Following the steps below will recover the sequence view< Close Tajima DGML by Pulse 12 Goto the start menu . Goto Tajima folder. oto DGML by Pulse 12 folder..(Program Files/Tajima) Goto Application data folder.. Goto the 12 folder.. Inside this folder you will see a file called pmlstate.ini , it will appear to have a gear icon on it Right click on this file and open it with Notepad Scroll near the bottom of this document and you should see something like the following;[sequence View Show Details On=0 Show Layer Icons On=0 Left=493 Top=250 Right=693 Bottom=650 Change the co-ordinates to match above highlighted in red Close this file and save it Reopen your software and your sequence view should work. Quote Link to comment
cousette31 Posted February 19, 2014 Share Posted February 19, 2014 I have Tajima DG/ML version 11.1.9.2988 and my sequence view will not show when I press Shift T. I was on the forum and it said to change the diagnostic settings which I tried but it didn't work. The settings I found on the forum were for Version 12, what are the settings for Version 11? Thank you, Quote Link to comment
jdemyers Posted February 19, 2014 Share Posted February 19, 2014 The file name that Frank mentions in is post about version 12 should be the same but the file location may be different. If you are using Windows XP Try this, go to My-Computer, then click on the C:\ drive. You should see a number of folders. Select Tools-Folder Options from the menu. Next Select the View tab. You should see a number of different options. Make sure the option "Show Hidden Files and Folders" is selected and click OK. Next you are going to search for the file PMLCFG.INI To do this click Start-Search in Windows. Select the option to Search for Files and Folders from the choices on the left hand side of the screen. You should see a place to enter a file name, Type PMLCFG.INi and click the search button. Windows will search for this file on your hard drive. When it finds it, the results will be displayed on the right hand side of the window. Delete this file by right clicking on the file and selecting "Delete" The PMLCFG.INI file controls all of the placement of the tool bars and windows in Tajima DG/ML. If you delete the file, and restart DG/ML, all of the toolbars will show in the upper left hand corner of the screen. You can move them by clicking and dragging the toolbars.. After this, you should see the sequence view again. I can have someone in support walk you through this if you need help. Let me know how you make out with this. Thanks "> Quote Link to comment
cousette31 Posted February 19, 2014 Share Posted February 19, 2014 I followed your instructions, but still can not open sequence view. After restarting DG/ML I don't see all the toolbars in the left corner. Any other ideas? Quote Link to comment
diver361 Posted February 22, 2014 Share Posted February 22, 2014 Hello I have old version Tajima Pulse Maestro 12 version (now using version 14). check and not found problem. Click in menu Window - Segment List or Shift+T. May be you reisntall software? 1 Quote Link to comment
Jdck Posted November 7, 2019 Share Posted November 7, 2019 Hello can any one please help me how to download Tajima Pulse Maestro 12. I need it. Its urgent can you please share your drop box adress. As i need 12 version pulse maestro x2 Its being a great help for me 1 Quote Link to comment
DVDEECEE Posted January 8, 2021 Share Posted January 8, 2021 Hi I am using pulse 15 version,new to pulse software can anyone help in the following 1.how to save the 3D file to a jpeg image 2.how to have a true view of the Digitised file please help me out Thank you Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.