Search the Community

Hi, After having many troubles in starting my old machine (the build is 1992, I changed to electronic card so finally it works. Now the problem, according to me is how to communicate between the PC and machine. Any one has this machine ? If yes, then what to use and which system? I mean (MS-Dos or Windows and which version?) I have tried some which I found over the Net, but I get the "communication error #2" again and again on my machine. Actually I use Win 7 PC...USB to RS232... 9-25 pins ... original Toy cable machine I think the data is well exchanged but it is not enough to do the embroidery job ... Help is appreciated

I was using some digitizing software and it seemed to work great. Once I had digitized the design I went to the realistic view and it would looked perfect as I pushed the mouse cursor over the design the window turned as if you were trying to read the numbers on your credit card moving the card at different angles. Get highlighted and showed up all the different of sheens of the thread from the different stitch angles quite impressive. At the time this happened I was using three or four different demo versions to see what I really wanted to spend the money on. No sooner that I decide on that program turned it off for the day came back the next day computers dead! I have no idea now what program it was has anybody run across this program, it digitized this rather perfect and the realistic viewer was awesome.

View File EmbroideryWare Trial The free trail version of EmbroideryWare lets you use all the features of the program for 30 days. After 30 days DST output is disabled. After your trial period is over you can continue to create embroidery designs and save them. Then when you do purchase you will already have something to stitch out. EmbroideryWare runs on Windows 7, 8, and 10. Windows XP is not supported. This version has the following features Free Updates for one year Running stitches Single Double Triple/Bean Quad Fills Custom fill patterns Definable fill direction and order Combine or subtract graphic objects to create complicated fill areas Gradient fills Automatic fill ordering Satin stitches Fixed width Tapered Variable along its length Linear and curved columns Satin feathering Satin patterning using fill patterns Satin edge shapes Free motion embroidery Fixed stitch length By time straight stitch By time Zig zag Advanced editing Scale, rotate, translate, align curves or points. Offset curves Add or delete curve elements Join or break apart curves Precise dimension based nudging Arrow key nudge Embedded objects within the graphic Underlay Start path End path Embroidery objects Embed an entire embroidery design in a graphic object Link the object to a file on your system and any objects referring to this link will update automatically Resize, rotate, and move the object and all the design elements in the embedded design will update automatically Import SVG PES PNG, BMP, and JPEG bitmaps to use for digitizing Export DST SVG (future release) Decorative stitches Chain stitch Hand stitch User created, can follow any path Text Convert true type fonts to running stitches, fills and satin outlines Digitized keyboard lettering which can be scaled and follow any path Patterning Linear Circular Cut work 2 needle 4 needle Hoop sizes 360×350, 360×200, 260×200, 260×150, 120×120 mm 5×7, 4×4, 2×2 inches Custom Definable jump anchors Thumbnail view of embroidery objects Stitch simulator with 3D rendering mode Drawing aides Rulers Stitch length marker mm, cm, inch units Grid snaps Usability features Keyboard short cuts Status bar step by step instructions Submitter jimmysb Submitted 01/31/2017 Category Embroidery software

I have been using Pulse artist plus embroidery software since 2008, but now it has stop working. Is their a solution to this problem?

This is in regard to PE-Design Next: all I want to be able to do is swap the start and end points on a simple line design (a quilting design as it happens), but I can't for the life of me figure out how. Can anybody point me to the answer, if it exists? There seems to be little or no advanced help for this software anywhere.

I am new to this as my wife had a stroke and I am helping her learn editing software 5d on her Pfaff all over. How do I get a clip art image into a embroidery design.

I read about Sequence view in manual. Ant not see this in my Tajima. Where this option& Without this i not check order of layer or reorder digitizied blocks.

Is there a software that allows to edit a PES file code? Thank you

Im using Pulse 14. How do I create multi layer embroidery for stock fonts. I have two examples attached. The #71 is incorrect and the #90 is correct. I want the #71 to look like the #90 .dst file wise. How do I do that? Please help, thank you.

Hello, we are in need of a copy of Brothers' BE-100 software. We have a key and a backup PC (running XP). Our main PC hard drive has crashed and we need to load BE-100 on to the spare machine. We are in a bind with orders and don't need the expense of upgrading! Can anyone help?!?

I have PE design 8 with the 8.3 upgrade and I run it on Windows 10. I also use embird with iconizer. This should show my embroidery files as picture thumbnails in PE design but it doesn't. I have tried everything but I can't fix it. Can anyone help? I'll put what I've already done below. I bought a new computer (which meant having to move the programmes in the first place) so they are installed on a brand new environment. I was installing a PE design 8 upgrade but after speaking to Brother and explaining my problem they thought the upgrade might be causing it so the sent me a PE design 8 full copy so that's what's now installed. My embird was 2018 so I updated that to 2020 too. I also had a number of emails with Dusan Balara from Embird and followed his instructions but to no avail. If I look at my designs in Windows they all have picture thumbnails but they disappear in PE design. Very annoying. Any help very welcome.

I have a melco bravo embroidery machine and use Design Shop Pro digitizing software. How do I change stitch density and pull comp on designs I've downloaded? I go to properties, change density and it reverts back to original density.

Quick question. We are running Pulse V14 and switched the settings to inches from mm. The settings won't stay. Is there a way to get those settings to stay?

Has anyone else upgraded to DG16 Maestro yet?

Hi Everyone, I am writing a free program for machine embroidery. It's totally free. I started the project about three months ago because I wanted to create a program that would do interesting stitching along a path that my commercial software did not do. It has evolved to something much more than that. The satin stitching is pretty complete. I am still refining fills, they work but do more jumps than I would like. Please check it out and let me know what you think of my program. https://sourceforge.net/projects/handstich/

ThreadEs embroidery software - start for 1 usd per day.. Less functions. http://www.threadses.com/

File Name: Flower decoration 2 File Submitter: Carol1950 File Submitted: 26 Jan 2014 File Category: Wilcom embroidery elements For convert and resize this embroidery design you can using this free FREE embroidery converter by Wilcom True Sizer: . . Click here to download this file