MARISA Posted November 5, 2013 Share Posted November 5, 2013 Does anyone use Brother PE-Design Next embroidery digitizing software? What do you like/dislike about it? Where i can download free or trial? 1 Quote Link to comment
diver361 Posted November 12, 2013 Share Posted November 12, 2013 Trial version for PE-DESIGN NEXT Quote Link to comment
ZloiCiuvac Posted November 19, 2013 Share Posted November 19, 2013 I bought Brother PE design 9 (next) software - it is a cheap beginners embroidery software, geared more toward the home market or hobby, personally I wish I had bought Wilcom ES 2 or 3 version (very expensive). Training and the learning curve when you change to a commercial professiona machine embroidery was not worth the headache!! Just need time... Quote Link to comment
sevigine Posted November 21, 2013 Share Posted November 21, 2013 There is a new machine embroidery software for digitizing out...it is Tajima Pulse 8800S..check it out at standard price around USD$5000 but intro price of USD$999 I think it is someway connected to PULSE.. Quote Link to comment
pauline Posted December 1, 2013 Share Posted December 1, 2013 I using this embroidery software and this ismy first digitizing software, but I have lot's of experience with other graphic software (Adobe Photoshop and Illustrator).So far, it gets the job done. I digitize all my embroidery designs. There are probably some more "smart tools" in Wilcom and Tajima, but I haven't needed them yet. Maybe in time I will.Or, may I just don't know what I don't know Quote Link to comment
candace Posted December 2, 2013 Share Posted December 2, 2013 I have used Brother PE design 9 next embroidery digitizing software and I think its just okay okay software. Quote Link to comment
valdubonheur Posted December 6, 2013 Share Posted December 6, 2013 I am trying to go back to embroidery after a \"break\" of a few years. I have PE Design 5.0 and the card reader, dongle, etc. I am considering upgrading to a newer version, but now I can\'t even get this version to work! It just doesn\'t install now. I had it installed and working for several years, and I dug out the cables and everything looks good from that standpoint. I\'ve seen several ads proclaiming that I can download version six \"for free.\" All I want to do is download one little 2\" sleigh and embroider it on my grandson\'s Christmas stocking. Obviously, I need help figuring out what to do.Thank you! Quote Link to comment
Carol1950 Posted January 20, 2014 Share Posted January 20, 2014 Conversion function is not correct. Every time EPS image is not smooth. Quote Link to comment
diver361 Posted January 31, 2014 Share Posted January 31, 2014 This is not professional software.. You need manual edit some nodes. Also EPS format every time not "clean". This is format for printers not for embroidery. Many noses, less information about curves, fillls Quote Link to comment
siv1987 Posted February 20, 2014 Share Posted February 20, 2014 i am new to digitizing. i digitized my first picture and the outlining satin stitch is to thick and i don't know how to fix it. if anyone can give me suggestions i would appreciate it. Quote Link to comment
ZloiCiuvac Posted September 17, 2014 Share Posted September 17, 2014 Will this work on Windows 8.1? Quote Link to comment
diver361 Posted September 17, 2014 Share Posted September 17, 2014 Will this work on Windows 8.1? Yes with last update. Quote Link to comment
jdemyers Posted September 30, 2014 Share Posted September 30, 2014 can you tell me I just got a new computer and I do not remember how to save my embroidery collection onto a disk to put it into the new computer. Also do you know how I go about putting in my embroidery digitizing software too. I need to do this ASAP so any help will be appreciated. Thank you in advance Quote Link to comment
Berez Posted November 6, 2014 Share Posted November 6, 2014 I have PE Design 7, which I used on 2000xp. I have not been able to use on my Windows 7. I understand that there is a fix that can be downloaded so I can use this software. Quote Link to comment
lefen Posted February 4, 2015 Share Posted February 4, 2015 lAP TOP was in local shop getting :de-bug: Software has disappeared and I seem only to have version 5.0 and 6.0 upgrade Programme seems to be looking for something before version 5 to let me programme everything back in. Please can you help Laptop is Window XP prof. 32.Helen Quote Link to comment
ssaffer12 Posted March 20, 2015 Share Posted March 20, 2015 I just upgraded I'm having an issue saving my user settings, specifically the units. I change them but the next time I open the embroidery digitizing software I'm back to factory settings. Any advice? Quote Link to comment
abbyotero Posted July 13, 2015 Share Posted July 13, 2015 I have just bought a new computer windows 8.1 - I have PE Design 6 unfortunately the computer does not recognize the card reader is there a solution to this or will I have to upgrade Quote Link to comment
TurkishTowels Posted August 13, 2020 Share Posted August 13, 2020 When creating a word using pes files , is there a way to automatically have the letters side by side having a set length in between letter? using PEdesign 10 thank you 1 Quote Link to comment
diver361 Posted December 5, 2020 Share Posted December 5, 2020 On 8/13/2020 at 1:29 PM, TurkishTowels said: When creating a word using pes files , is there a way to automatically have the letters side by side having a set length in between letter? using PEdesign 10 thank you This is connection with letters type. Quote Link to comment
Recommended Posts
You can post now and register later. If you have an account, sign in now to post with your account.