Embroidery technique sewing experience

Hi , I have a nylon jacket with a lining that has a zipper for embroidery patches to be sewn on, I never sew on Nylon before, what underlay and what backing is recommend for this job.. The machine embroidery design is a OVAL shaped logo with fills and satins layered

I am need of help ASAP. Order due tomorrow. We are sewing a design that is letters PRMS and had it custom digitized. Upon sewing on polo shirts inside the R and top part of the S it is breaking fabric down and causing a hole on both letters. I have changed the tension and backing but still doing it. We have sewn this same design on dress shirts with no problem. Digitizer is saying that it is not the file. Appreciate any suggestions anyone has. Thanks

Hi there, I am trying to embroider a rubber-type piece of "material". I really don't like to call it material, because it is about 1/8" thick. (For those that know about horse equipment, it is for a brow band) When I try to embroider it, the thread "sinks" into the piece and doesn't come back out. Hard to explain, but I know it can be done, we have a catalog from another vendor that does this. Any suggestions or advice would be greatly appreciated! Thank you,

Hey all! I’ve been using this machine for about 6 months and only recently started learning more about filling a shape. My circles always have these lines through them, is this a design issue? It’s as if the shape pattern never fully meets when embroidering, but the design itself is a closed complete circle. The design program I use is inkstitch on inkscape. Not sure how to insert an image, hopefully it’s easy to understand from my description.

I'm extremely new to the embroidery world so excuse my lack of terminology and explanation. We hare started doing embroidery for local sports teams (high schools and middle schools) and they are repeatedly asking for their team name be put across the back/neck of their shirts right below the collar. These are microfiber type shirts and we aren't able to keep center when pressing the hoop down over the shirt resulting in off center name logo. What is a solution I can use to fix this. We need this ASAP.

I'm new to the embroidery business and I'm trying to find an easy way to sew the patches onto the baseball caps. Any suggestions?

I had such a nice response to my question about monogramming heavy canvas bags, that i would like to pose another question. What tricks do you successful monogrammed have for monogramming very fine pashmina shawls and very fine pima cotton baby one sizes? I'll pay it forward and share what works for me. Thanks for the help you've given me so far.

Does anyone have a good location for embroidery designs on sweatpants (adult & youth)? The chart I have says it should be at crotch sleeve, but that seems awfully low. It is about a 4" embroidery design. Thanks for you help.

Hi Not sure if I can post this here - if not, sorry - please delete. I am looking for someone that can digitize a design for me. i have the image but am unable to do it myself. Happy to pay Thank you

Here we will place everything that can be repaired and restored with the help of machine embroidery. The word "clothing" is here applied conditionally so that it is not associated with the repair of embroidery technology.

Did sombody find out how to digitize for this material? I'm having troubles with a filled circle. The digitizing company we are using has no idea about digitizing for this material, so I had to do edits to the design, changing the understitches and the fills, but still can't get it right. Any tip about digitizing this (we've got lot's of tips about hooping) would be really appreciated! Attached is my embroidery file for this design. Thank you so much!!! Carolina Sosa Embroidery Manager Righteous Clothing Agency. Portland, OR 1799a.EMB

Hello I am brand new to embroidery and would like some tips on getting better lettering and lines to embroider. The shapes are passable but the letters are just terrible. I used sophiesew to digitize with satin stitches. Thank you for the help. brother se400 with 75/10 needle

Hi everyone, My son want to make a project for his room and i have a few question that i don't cannot find answer... If somebody could give me some clue would be really nice. He would like to use a big sheet of velcro loop and create some design to make patche, then stick to the sheet. He would like to have big size sheet 2meter long on 1m large. And some of the custom patch size 70cmx70cm. He told me that he saw online website selling embroidery that could do custom patches. I would like to know if can do those size and if it's not going to break my wallet? Then i'd like to know is there is no alternative that would be cheaper but look nice as embroidery…

hi all.....i am very new to embroidering and have my first job with fleece.....is there any primer on how to handle embroidering on it?.......it will be fleece sweatshirts...like the thin underarm our and champion ones....they are like a thin micro-fiber fleece.......any tips about backing or any topping i need or anything?......i really appreciate any advice....these r very expensive and i don't wanna mess up too many.

Does anyone know how to use the silver embroidery machine? Im new to this and would love some help and guidance.

Hi everybody! I've never made embroidery on hats and caps and I need your advise. Which hats/caps are better for embroidery? On which ones embroidery will look better? I mean structured or unstructured? 5- or 6panels?

Hi Everyone! Im just looking for some advice, I do a lot of cap work and have a customer who really wants the DSquared style big square embroidery logo. Just wondering how you would recommend doing this? I have trying making a patch and sewing this on like an applique but the stitching to tack it down doesn’t line up? Are these made flat before the caps are put together? This is an example of what type of outcome I’m looking for... in our Embroidery gallery Thanks in advance Kevin

My grandson's school requires that his trousers have the school logo placed on the waistband of his trousers, my question is how to place trousers in frame of a Brother Innov-is V5. the actual logo is approx 20x20mm

I have a problem with pull comp for very large free embroideyr designs on some fabrics. How can I fix this problem?

iemand embossed embroidery voorbeelden

I have a embroidery logo that consistently has looping problems. It's a long skinny triangle. Does that make a difference? How can I fix it so that there aren't any loops?

Hi everyone! Does anyone have any pictures of cross stitch that’s been done on an embroidery machine? I want to buy a machine for this reason only buy would like to see some examples and know from what machine/software they came from. I want it to look like hand stitched cross stitch as much as possible. Thank you!

why not see exactly the same?

Hi everyone, I’m diving into the world of machine embroidery and have a question about designing custom patterns. I’m using a Brother PE800 and want to create a unique design that blends intricate floral patterns with geometric elements. What’s the best software for designing and digitizing such complex patterns? Also, any tips on ensuring the design stitches out cleanly and avoids thread bunching? I’ve heard mixed reviews about different programs and techniques, so any advice or personal experiences would be greatly appreciated.

I bought a Patch Kit with water soluble stabilizer. I have a pattern for a free standing butterfly and the instructions say to use this stabilizer. The problem is it won't hold the thread, It starts by threading 1/2 the outline, when it starts the wing it looks stringy and eventually puts a big hole in the stabilizer. I even tried tripling the stabilizer and the same thing happens. I would appreciate any feedback on this. It's a beautiful pattern.